2 May 2014 in Transportation Infrastructure Geotechnology
The main objective of this paper is to discuss the experimental and theoretical approaches developed by different researchers in order to understand and to evaluate the soil geosynthetic interaction under different loading conditions. In the paper, the soil-geosynthetic interaction in pullout, direct shear, and inclined plane tests under both static and cyclic loading is analyzed based on the different theoretical and experimental results carried out by the authors and also available in literature. For each type of test, the factors affecting test results and soil-geosynthetic interface behavior, the theoretical model developed to predict the interface resistance and mobilized friction, and the relevance of the interface parameters obtained through the different tests in the design and performance of geosynthetic reinforced earth structures are discussed in detail.
1 June 2017 in Geotextiles and Geomembranes
1 June 2016 in Geosynthetics International
In reinforced earth structures, the main function of the included reinforcement is to redistribute stresses within the soil mass in order to enhance internal stability. Redistribution of internal stresses in reinforced soil can be very complex. In order to simulate the behaviour of geosynthetic reinforcement, large-scale laboratory pullout tests are carried out. Once a pullout load has been applied, the tensile force is transferred along the geogrid (from the front to the free end) and reduced through interaction with the soil. The active length is the portion of the geogrid on which the mobilisation of interaction mechanisms withstands the applied pullout load. Evaluation of the active length can allow for the understanding of the interaction mechanisms and can therefore be important for the design of the soil–geosynthetic interface. This paper describes the interpretation of pullout test results based on an experimental and theoretical evaluation of the active length. This approach has been used to analyse several large-scale pullout tests performed on two extruded geogrids embedded in a compacted granular soil, varying the specimen lengths and the applied effective vertical pressures.
1 January 2017 in Procedia Engineering
1 January 2016 in Procedia Engineering
21 December 2017 in IOP Conference Series: Earth and Environmental Science
Nowadays, the need to increase pavement service life, guarantee high performance, reduce service and maintenance costs has been turned a greater attention on the use of reinforcements. This paper presents findings of a numerical investigation on geogrid reinforced flexible pavement roads, under wheel traffic loads, using a three-dimensional Finite Element Method (FEM). The results obtained show the effectiveness of glass fibre grids as reinforcement which, with appropriate design and correct installation, by improving interface shear resistance, can be used to expand the performance of flexible pavements in different ways: by increasing the road service life providing a relevant contribution against superficial rutting or by decreasing the construction costs due to the reduction in the reinforced HMA layer thickness and thus of mineral aggregate required for its construction.