Anatoliy Nikolenko

Anatoliy Nikolenko

Auto-generated profile, based on publicly available information

Anatoliy Nikolenko

Український державний університет науки і технологій, м. Дніпро

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 June 2021
Verified
Conference Paper
Closed access
VSVasyl Stopkin
Vasyl Stopkin
VKValeriy Kuznetsov
Valeriy Kuznetsov
VKVitalii Kuznetsov
Vitalii Kuznetsov
ANAnatoliy Nikolenko
Anatoliy Nikolenko
MBMykola Babyak
Mykola Babyak
PHPetro Hubskyi
Petro Hubskyi
The paper deals with development of the mathematical model of the two-mass electric drive of a direct current of the electric locomotive with the observer of a full order. The model provides an opportunity to study the change in the ratio of the moments of inertia of the two masses of the electric drive in order to reduce speed fluctuations and inconsistencies in the speeds of these masses. The observer estimates the speed on the basis of information about the supply voltage and motor current. Instead of directly measuring the speed, an observer is used, who uses the measured armature current and supply voltage to change the task to speed. As a comparison, the classical model of subordinate coordinate control for a two-mass electric drive is considered. The disadvantages of the latter are the complexity of calculating the parameters of the links during debugging. Identification and description of the load moment is carried out by a system of differential equations. Reproduction of the vector of coordinates of the system and the vector of perturbations (load moment) is carried out by the observer with an error in the steady state. To compensate for it, the load torque signal in the static is fed to the input of the speed circuit through the debugging link. The results of research on the mathematical model, with its appropriate adjustment under the conditions of a particular electric drive, can significantly reduce the impact loads on the electric drive by accurately matching the speeds of two masses and from a practical point of view provide information on calculations of the kinematic circuit and selection of optimal gear ratio.

29 November 2022
Verified
Book Chapter
Closed access
PDF file
VSVasyl Stopkin
Vasyl Stopkin
ANAnatoliy Nikolenko
Anatoliy Nikolenko
VKVitalii Kuznetsov
Vitalii Kuznetsov
MTMykola Tryputen
Mykola Tryputen
OKOlexandr Olexandrovich Kuzenkov
Olexandr Olexandrovich Kuzenkov

1 April 2019
Verified
Conference Paper
Closed access
STSerdiuk Tetiana
Serdiuk Tetiana
VKVitalii Kuznetsov
Vitalii Kuznetsov
SKSerdiuk Kseniia
Serdiuk Kseniia
NANikolenko Anatoliy
Nikolenko Anatoliy
KYKuznetsova Yevheniia
Kuznetsova Yevheniia
KAKuznetsova Alisa
Kuznetsova Alisa
The automated method of measuring the time and amplitude parameters of code current and parameters of track circuits (input impedance of the track circuit, a characteristic impedance, a propagation constant) were elaborated. The mathematic model of track circuits' channel of transferring code current was improved and considered in this paper. The algorithms of definition of parameters of track circuit are offered.

21 February 2025 in Theory and practice of metallurgy
Verified
Journal Article
Open access
PDF file
DSD.V. Shevchenko
D.V. Shevchenko
AOA.M. Ovcharuk
A.M. Ovcharuk
VGV.A. Gladkikh
V.A. Gladkikh
ABA.V. Bezugliy
A.V. Bezugliy
ANA.V. Nikolenko
A.V. Nikolenko
The paper presents the results of a study of the electrical modes of ferronickel furnaces OTF-1 and OTF-2 at the Pobuzhsky ferronickel plant. It was found that the furnaces operate in arcless mode. An asymmetrical voltage mode is observed: electrode casing - under, which indicates an unbalanced mode of the furnace. As a result of measurements, a significant transfer of power was detected in the area of the electrical circuit of the 4th, 5th, 6th electrodes. An analysis of the electrical mode of a 48 MVA round ferronickel furnace in the city of Hua-Hua (China) showed that the use of a furnace transformer without a voltage booster and an autotransformer makes it possible to provide the necessary electrical mode of ferronickel furnaces. An analysis of the electrical mode of a 90 MVA round ferronickel furnace in Guatemala showed the possibility of operating these furnaces in a combined mode, i.e. in the presence of an electric arc, which is controlled by the resistance of the electrodes and the power ratio in the electric arc and slag.

8 September 2021
Verified
Book
Open access
DTDmytro Tsyplenkov
Dmytro Tsyplenkov
ANAnatolii Nikolenko
Anatolii Nikolenko
AKAndrii Kolb
Andrii Kolb
AGAndrii Grebeniuk
Andrii Grebeniuk
VKVitalii Kuznetsov
Vitalii Kuznetsov
VKViktor Kovalenko
Viktor Kovalenko
The regularities of processes and phenomena that occur in dielectric, conductive, semiconductor and magnetic materials as part of electrical and electronic devices under the influence of energy of electric, magnetic and thermal fields are considered. The main feature of the textbook is a detailed structuring of educational material, focusing largely on the distance form of learning, as well as demonstration of the close relationship of the properties of various electrical materials and the basics of electrical engineering on specific examples. The manual is intended for students of specialties: 141 - "Electrical Energetics, Electrical Engineering and Electromechanics" and 275 - "Transport technologies", as well as for students of other specialties of higher education, which are related to the study of disciplines of electrical engineering and electronic computer science.

13 June 2024 in Modern problems of modeling
Verified
Journal Article
Open access
PDF file
UTUkrainian State University of Science and Technologies
Ukrainian State University of Science and Technologies
ANA Nikolenko
A Nikolenko
У статті розглянуто методологічні підходи до моделювання роботи асинхронного електродвигуна з короткозамкненим ротором в умовах неякісної електроенергії. Актуальність дослідження обумовлена високою часткою електродвигунів у глобальному енергоспоживанні, що становить до 46%, а також негативними наслідками зниження якості електропостачання для ефективності, надійності та ресурсу електромеханічних систем. Наведено аналіз сучасного стану математичного моделювання асинхронних двигунів, зокрема, підкреслено, що переважна більшість існуючих моделей базується на припущенні симетричності та синусоїдальності напруги живлення, що не відповідає умовам реального промислового середовища. Досліджено різні класи математичних моделей, які частково враховують окремі показники якості електроенергії, зокрема несиметрію, гармонічні спотворення тощо. Показано, що моделі, орієнтовані на аналіз окремих чинників, не здатні забезпечити комплексну оцінку енергетичної ефективності двигуна. У статті сформульовано вимоги до універсальної імітаційної моделі асинхронного двигуна, здатної враховувати всі основні показники якості електроенергії (ПКЕ) одночасно, як в усталених, так і в перехідних режимах роботи. Запропоновано концепцію побудови моделі, яка базується на поєднанні обчислювальних блоків, запозичених із відомих математичних аналогів, що дозволяє враховувати вплив несиметрії та несинусоїдальності напруги живлення, а також виконувати розрахунок миттєвих значень струмів, втрат у сталі та міді, електромагнітного моменту, ККД та коефіцієнта потужності. У моделі передбачена можливість розширення з урахуванням фільтрації гармонік і змінних частот мережі, з подальшим уточненням параметрів шляхом експериментальної ідентифікації. Зроблено висновок про відсутність єдиної універсальної моделі асинхронного двигуна, яка враховує всі ПКЕ, та обґрунтовано доцільність створення імітаційної моделі нового типу як ефективного інструменту для аналізу режимів роботи електродвигуна в умовах реальної електромережі. Ключові слова: асинхронний електродвигун, математичне моделювання, якість електроенергії, симетрія, несинусоїдальність, енергоефективність, імітаційна модель, електромеханічний перетворювач. The article explores methodological approaches to modeling the operation of a squirrel-cage induction motor under conditions of poor power quality. The relevance of the research is driven by the significant share of electric motors in global energy consumption—up to 46%—and the detrimental impact of power quality deviations on the efficiency, reliability, and service life of electromechanical systems. A comprehensive analysis of the current state of mathematical modeling of induction motors is presented, with emphasis on the limitations of most existing models, which typically assume symmetrical and sinusoidal supply voltage, thus failing to reflect real-world industrial conditions. Various classes of mathematical models are examined, particularly those that account for certain aspects of power quality such as voltage asymmetry, harmonic distortions, and frequency instability. It is shown that these models, although effective in specific cases, cannot provide a holistic evaluation of the motor’s energy performance. The article formulates the requirements for a unified simulation model of an induction motor that can simultaneously account for all major power quality indicators (PQIs), both in steady-state and transient operating conditions. The proposed model is based on the integration of computational blocks from existing analogs, enabling consideration of non-sinusoidal and unbalanced supply voltages. It allows the calculation of instantaneous stator and rotor currents, core and copper losses, electromagnetic torque, efficiency, and power factor. The model is expandable to incorporate harmonic filtering and variable frequency conditions, with the possibility of parameter refinement through experimental identification. It is concluded that no single universal model currently exists to evaluate the energy performance of induction motors under degraded power...