State Key Laboratory of Metastable Materials Science and Technology, Key Laboratory for Microstructural Material Physics of Hebei Province, School of Science, Yanshan University, Qinhuangdao, China
Auto-generated profile, based on publicly available information
Mingqi Gu
State Key Laboratory of Metastable Materials Science and Technology, Key Laboratory for Microstructural Material Physics of Hebei Province, School of Science, Yanshan University, Qinhuangdao, China
In this article, vernier effect (VE), which is an effective method to enhance the measurement sensitivity of strain and temperature, was experimentally studied through cascading a Mach-Zehnder interferometer (MZI) with a Sagnac interferometer (SI). The MZI consisted of a tapered single-mode fiber (SMF), while the SI was formed using a panda-shaped polarization-maintained fiber (PMF). Free spectral ranges (FSRs) of the two interferometers were slightly different from each other, and as a result, the VE was successfully excited. The experimental results demonstrated that the measurement sensitivity of strain was improved from 26.7 to −110.92 pm/ $\mu \varepsilon $ at the temperature of $24~^{\circ }$ C, while the measurement sensitivity of temperature was improved from −2978 to 7934 pm/°C at the strain of $0~\varepsilon $ . The sensitivity was amplified about four times. The cross-sensitivity of temperature and strain measurements is $71.53~\mu \varepsilon $ /°C. The proposed sensor exhibits in advantages of simple in construction, high sensitivity, and multiparameter measurements making it a superior contender for strain and temperature monitoring in engineering.
16 October 2024 in Journal of Lightwave Technology
The high-resolution strain detection holds significant research value in terms of providing early warning for cracks in aircraft, wind energy blades, and combustible gas containers. We propose and experimentally demonstrate a strain sensor based on Sagnac loop and Fiber Bragg grating (FBG) in dual-wavelength erbium-doped fiber laser (EDFL), showing the properties of high resolution and wide detection range, the polarization maintaining fiber (PMF) in the Sagnac loop serves as both an interference filter and a sensing probe. Nonetheless, the strain measurement range is limited by the Sagnac loop's short free spectral range, we add an FBG in the Sagnac loop, which provides a calibration element to improve the range. We successfully improve the spectral quality factor to 170.56 and reach a high resolution of 0.067 nm in a wide measurement range of 0-6434.81 µϵ. The results of our experiments show that the method is ideally suited for precise strain measurement, with major potential applications in environmental monitoring, health monitoring, biomedicine, and aerospace.
Fiber-optic interferometer has been employed in volatile organic compound (VOC) sensing owing to its electromagnetic immunity, reliability, and precise monitoring. However, the measurement sensitivity still needs to be further enhanced to meet higher requirement in trace VOC detection. In this paper, fiber-optic Sagnac interferometers (SIs) based on vernier effect (VE) are proposed and experimentally studied to achieve the highly sensitive measurement of ethanol vapor. Two polarization-maintaining fibers (PMFs) with slightly different lengths are used to form the sensing arm and reference arm in the two SIs and thus VE is excited. Polydimethylsiloxane (PDMS) film which is coated on the outside of sensing arm acts as absorbing material for ethanol vapor. The above method resulting in significant enhancement of the measurement sensitivity. Experimental results show that the measurement sensitivities based on cascaded and paralleled SIs are 11.27 pm/ppm and 11.34 pm/ppm respectively, which is enhanced by about 13 times contrasted to the measurement sensitivity based on single SI. Meanwhile, limit of detection (LOD) for the cascaded and paralleled SIs are as low as 2.049 ppm and 2.156 ppm respectively. The proposed sensor has the advantages of high sensitivity, low LOD, good repeatability, strong robustness, and low production cost, showing potential applications in ethanol vapor detection.