State Key Laboratory of Metastable Materials Science and Technology and the Key Laboratory for Microstructural Material Physics of Hebei Province, School of Science, Yanshan University, Qinhuangdao, China
Auto-generated profile, based on publicly available information
Sa Zhang
State Key Laboratory of Metastable Materials Science and Technology and the Key Laboratory for Microstructural Material Physics of Hebei Province, School of Science, Yanshan University, Qinhuangdao, China
In this article, vernier effect (VE), which is an effective method to enhance the measurement sensitivity of strain and temperature, was experimentally studied through cascading a Mach-Zehnder interferometer (MZI) with a Sagnac interferometer (SI). The MZI consisted of a tapered single-mode fiber (SMF), while the SI was formed using a panda-shaped polarization-maintained fiber (PMF). Free spectral ranges (FSRs) of the two interferometers were slightly different from each other, and as a result, the VE was successfully excited. The experimental results demonstrated that the measurement sensitivity of strain was improved from 26.7 to −110.92 pm/ $\mu \varepsilon $ at the temperature of $24~^{\circ }$ C, while the measurement sensitivity of temperature was improved from −2978 to 7934 pm/°C at the strain of $0~\varepsilon $ . The sensitivity was amplified about four times. The cross-sensitivity of temperature and strain measurements is $71.53~\mu \varepsilon $ /°C. The proposed sensor exhibits in advantages of simple in construction, high sensitivity, and multiparameter measurements making it a superior contender for strain and temperature monitoring in engineering.
1 November 2014 in Colloids and Surfaces B: Biointerfaces
The high-resolution strain detection holds significant research value in terms of providing early warning for cracks in aircraft, wind energy blades, and combustible gas containers. We propose and experimentally demonstrate a strain sensor based on Sagnac loop and Fiber Bragg grating (FBG) in dual-wavelength erbium-doped fiber laser (EDFL), showing the properties of high resolution and wide detection range, the polarization maintaining fiber (PMF) in the Sagnac loop serves as both an interference filter and a sensing probe. Nonetheless, the strain measurement range is limited by the Sagnac loop's short free spectral range, we add an FBG in the Sagnac loop, which provides a calibration element to improve the range. We successfully improve the spectral quality factor to 170.56 and reach a high resolution of 0.067 nm in a wide measurement range of 0-6434.81 µϵ. The results of our experiments show that the method is ideally suited for precise strain measurement, with major potential applications in environmental monitoring, health monitoring, biomedicine, and aerospace.
31 July 2024 in IEEE Transactions on Instrumentation and Measurement
Long-Period Fiber Grating (LPFG) is a promising curvature sensor due to its high bending sensitivity. In this paper, a Fiber Ring Laser (FRL)-based curvature sensor with an LPFG was proposed and experimentally verified. LPFG acted as both a filter and a curvature sensing element. The maximum measurement sensitivity of curvature reached 7.99 dB/m -1 in a wide range of 4.89-13.33 m -1 which was wider than most of previously reported curvature sensors. Bending and filtering characteristics of LPFG were verified through changing its position in FRL. The output wavelength of the FRL could be tuned through the bending of LPFG. The proposed curvature sensor, showing the advantages of wide measurement range, high resolution, and high sensitivity, has potential applications in monitoring the deformation in surgical instruments, robot arm, and engineering objects.