16 September 2024 in Applied Physics Letters
Silicon nitride (Si3N4) photonic integrated circuits are rapidly developing in recent decades. The low loss of Si3N4 attracts significant attention and facilitates a wide range of applications in integrated photonics. In this work, we demonstrate the foundry fabrication of a 300-nm-thick 8-in. wafer-scale Si3N4 platform, with a microresonator intrinsic quality factor of up to 15×106, corresponding to an ultralow loss of 2.2 dB/m. Leveraging this platform, we develop a mature process design kit, achieving a single-mode waveguide propagation loss of less than 5 dB/m, an edge coupler loss of 1.3 dB, and an insertion loss of 0.07 dB for multimode interference couplers. Utilizing the processed Si3N4 chip, we realize a hybrid integrated tunable external cavity laser with a tuning range from 1534 to 1602 nm, a record-high side-mode suppression ratio of up to 76 dB, an optical power of 26 mW, and an intrinsic linewidth of down to 314 Hz. Our work lays a solid foundation for the further development of applications, including nonlinear optics, quantum optics, optical communications, and ranging.
4 March 2026 in Nature Photonics
5 November 2026 in Nature Communications
Optical links underpin global communications from chip-to-chip interconnects to transoceanic fibre networks. Conventional architectures remain distance-dependent: long-haul systems rely on coherent transmission for high spectral efficiency and capacity, while short-reach links favour intensity modulation due to hardware complexity and power constraints. This divide impedes scalability for AI-driven intra-data-centre traffic and low-latency, flexible cloud-to-edge connectivity. Here we demonstrate a unified silicon photonic coherent solution for all-distance optical communications. By employing an ultralow-loss silicon nitride external cavity, we achieve 70 mW of direct laser output with a sub-kHz linewidth and 13.7% wall-plug efficiency. Paired with silicon photonic transceivers, this platform enables short-distance transmission without optical amplification across 256 wavelength channels, corresponding to an aggregate data rate of 81.92 Tb/s, as well as transmission exceeding 4400 km. It also supports wavelength switching and transmission re-establishment at tens-of-microseconds timescales. These results indicate the potential to simplify optical interfaces and enable flexible wavelength-routed connectivity.
11 August 2026 in Nature Communications
Manipulating optical spectra with complex spectral responses is central to high-performance photonic computing and sensing, but conventional integrated circuits typically increase features by cascading devices, which scales complexity linearly with cascade depth and is difficult to expand. Here, we introduce hyper-spectral photonic integrated circuits comprising a chain of interconnected reflective nodes. The central idea is to introduce partial reflectivity, thereby leveraging both transmissive and reflective interference within each component node. This architecture expands the accessible delay distribution and exhibits a superlinear complexity growth. We implement the circuits through a recursive inverse-design workflow that jointly exploits node geometry and circuit topology to maximize spectral complexity. Experimentally, a single waveguide incorporating 11 reflective nodes achieves a complexity comparable to at least 100 cascaded Mach-Zehnder interferometer stages. An array of these circuits reconstructs spectra with sub-picometer resolution across an 800 nm bandwidth. This performance bridges optical and microwave frequencies by enabling simultaneous monitoring of optical and radio signals within a single device.