25 May 2017 in IEEE Transactions on Intelligent Transportation Systems
The safety of automated vehicles (AVs) must be assured before their release and deployment. The current approach to evaluation relies primarily on 1) testing AVs on public roads or 2) track testing with scenarios defined in a test matrix. These two methods have completely opposing drawbacks: the former, while offering realistic scenarios, takes too much time to execute and the latter, though it can be completed in a short amount of time, has no clear correlation to safety benefits in the real world. To avoid the aforementioned problems, we propose accelerated evaluation, focusing on the car-following scenario. The stochastic human-controlled vehicle (HV) motions are modeled based on 1.3 million miles of naturalistic driving data collected by the University of Michigan Safety Pilot Model Deployment Program. The statistics of the HV behaviors are then modified to generate more intense interactions between HVs and AVs to accelerate the evaluation procedure. The importance sampling theory was used to ensure that the safety benefits of AVs are accurately assessed under accelerated tests. Crash, injury and conflict rates for a simulated AV are simulated to demonstrate the proposed approach. Results show that test duration is reduced by a factor of 300 to 100 000 compared with the non-accelerated (naturalistic) evaluation. In other words, the proposed techniques have great potential for accelerating the AV evaluation process.
31 January 2017 in IEEE Transactions on Intelligent Transportation Systems
Dedicated short range communication (DSRC) was designed to provide reliable wireless communication for intelligent transportation system applications. Sharing information among cars and between cars and the infrastructure, pedestrians, or “the cloud” has great potential to improve safety, mobility, and fuel economy. DSRC is being considered by the U.S. Department of Transportation to be required for ground vehicles. In the past, their performance has been assessed thoroughly in the laboratories and limited field testing, but not on a large fleet. In this paper, we present the analysis of DSRC performance using data from the world's largest connected vehicle test program--Safety Pilot Model Deployment lead by the University of Michigan. We first investigate their maximum and effective range, and then study the effect of environmental factors, such as trees/foliage, weather, buildings, vehicle travel direction, and road elevation. The results can be used to guide future DSRC equipment placement and installation, and can be used to develop DSRC communication models for numerical simulations.
6 May 2019 in IEEE Transactions on Intelligent Transportation Systems
Automated vehicles can change the society by improved safety, mobility, and fuel efficiency. However, due to the higher cost and change in business model, over the coming decades, the highly automated vehicles likely will continue to interact with many human-driven vehicles. In the past, the control/design of the highly automated (robotic) vehicles mainly considers safety and efficiency but failed to address the ``driving culture'' of surrounding human-driven vehicles. Thus, the robotic vehicles may demonstrate behaviors very different from other vehicles. We study this ``driving etiquette'' problem in this paper. As the first step, we report the key behavior parameters of human driven vehicles derived from a large naturalistic driving database. The results can be used to guide future algorithm design of highly automated vehicles or to develop realistic human-driven vehicle behavior model in simulations.
3 November 2020 in IEEE Transactions on Intelligent Transportation Systems
Shared Mobility-on-Demand using automated vehicles can reduce energy consumption and cost for future mobility. However, its full potential in energy saving has not been fully explored. An algorithm to minimize fleet fuel consumption while satisfying customers’ travel time constraints is developed in this article. Numerical simulations with realistic travel demand and route choice are performed, showing that if fuel consumption is not considered, the Mobility-on-demand (MOD) service can increase fleet fuel consumption due to increased empty vehicle mileage. With fuel consumption as part of the cost function, we can reduce total fuel consumption by 7% while maintaining a high level of mobility service.