11 October 2013 in IEEE Transactions on Electron Devices
SRSilvestre Salas Rodriguez
Silvestre Salas Rodriguez
AMAndrea G. Martinez-Lopez
Triple-gate FinFETs have demonstrated to be promising candidates to push further the performance limits of the microelectronics industry, thanks to their high immunity to short-channel effects. However, owing to their 3-D nature, high parasitic gate capacitances appear that dramatically degrade their high-speed digital and analog/RF performances. Thus, in order to meet the International Technology Roadmap of Semiconductors projection, it is mandatory to find layout or technological solutions to reduce the total parasitic gate capacitance. In this context, it is necessary to develop a model that describes the parasitic capacitance in terms of the FinFET geometry. In this paper, a semianalytical extrinsic gate capacitance model for silicon-on-insulator triple-gate FinFET, based on 3-D numerical simulations, is presented. The model takes into account the external (five components) and internal (two components) fringing capacitances from the gate to the source/drain electrodes as well as the overlap capacitances. Comparisons with experimental results are presented to validate the developed model. Finally, based on the developed model, the evolution of the total parasitic gate capacitance as the channel length is reduced toward the 12-nm technology node is analyzed.
19 December 2012 in IEEE Transactions on Microwave Theory and Techniques
SRSilvestre Salas Rodriguez
Silvestre Salas Rodriguez
AMAndrea G. Martinez-Lopez
Triple-Gate FinFETs have been demonstrated to be promising to push further the down scaling of CMOS technology, because of their high immunity against the so-called short channel effects. However, due to their three-dimensional (3-D) architecture, strong degradation of their analog characteristics has been reported, basically due to large extrinsic resistances and capacitances. In this paper, based on measurements and 3-D numerical simulations, we analyze the impact of the extrinsic gate capacitances on the RF behavior of FinFETs. It is shown that the reduction of the fin spacing, the modification of the fin geometrical aspect ratio (height/width) as well as the optimization of the fin spacing-fin Source/Drain extension ratio can significantly improve the FinFET RF performance.
30 July 2009 in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
1 September 2010 in Microelectronics Reliability
10 July 2012 in IEEE Transactions on Nuclear Science
BSBlanca Susana Soto-Cruz
This paper presents a compact model implemented in Verilog-A for partially depleted (PD) silicon-on-insulator (SOI) sub-micron MOSFETs, which allows for describing the Single Events Effects (SEE) produced by heavy ions. This Verilog-A module can be coupled with Spice simulator in order to have faster (time-efficient) circuit simulations with good agreement. Due to the physical aspects considered in the model, better flexibility than the standard current source method is achieved. Experimental data for 0.15 and ${0.13}~\mu{\rm m}$ technology nodes are used to validate our model. Robustness of the model to reproduce experimental results is demonstrated on three data-sets available in literature: 1) single event transient current in stand-alone n-FET from ${0.13}~\mu{\rm m}$ PD SOI process hinted by heavy ions at different positions; 2) SEE propagation in path delay with ten inverters realized in ${0.13}~\mu{\rm m}$ PD SOI process; 3) 6T SRAMs with active element delay on SEE-rad-hardened $0.15~\mu{\rm m}$ PD SOI process.