This article presents a 2.4-GHz low-power compact integer-N ring oscillator-based phase-locked loop (PLL) for Internet of Things (IoT) applications. The proposed integer-N PLL is based on a dual loop Offset-PLL topology to achieve a fine frequency resolution similar to conventional fractional-N PLL. Not using a delta-sigma modulator (DSM) allows an expanded PLL bandwidth without deteriorating the overall noise performance. Implemented in 28 nm CMOS fully depleted silicon on insulator (FD-SOI) technology, the proposed architecture requires a 22-MHz internal reference frequency while achieving a 2-MHz frequency resolution and a 3-MHz PLL bandwidth. Measured prototypes perform -43.9 dBc reference spur, as an average value over all the bluetooth low energy (BLE) band and numerous tested dies, a jitter Figure-of-Merit of -229.6 dB for a power consumption of 0.87 mW and a core area of 0.0256 mm².
21 January 2022 in IEEE Journal of Solid-State Circuits
Human body communications require energy-efficient transceivers to connect diverse devices on the human body for wellness and medical applications. This article presents a fully digital pulse-based transmitter (TX) for capacitive body-coupled communications (c-BCCs) in 28-nm Fully Depleted Silicon on Insulator (FD-SOI) CMOS. The TX is operating at 450 MHz where surface-wave (SW) propagation is the dominant mechanism of c-BCC, offering a larger bandwidth with a more stable channel. The heavily duty-cycled TX uses a 90-MHz free-running oscillator and edge combiners to generate OOK Gaussian-shaped pulses through a switched-capacitor power amplifier (PA). Wide range forward body biasing (FBB), specific to FD-SOI technology, allows frequency tuning and adaptive efficiency optimization as a function of data rate. The proposed TX consumes 17–76 $\mu \text{W}$ for flexible data rates from 0.1 to 27 Mb/s (170 down to 2.8 pJ/b) with up to 14% system efficiency under 0.5-V supply voltage.