22 September 2020 in Nature Reviews Earth & Environment
1 March 2019 in Green Materials
This paper details the main factors influencing the performance of limestone calcined clay cements (LC3). The kaolinite content plays a major role in the rheological properties as well as strength development. Even in the presence of secondary phases, kaolinite can be accurately quantified by thermogravimetric analysis. The performance of LC3 is slightly influenced by the calcination process of clay, but it can be optimized by using the correct calcination temperature and applying a specific mix design with adjusted sulfate and alkali content. The hydration reactions of LC3 are fully characterized. They vary slightly from plain cement. There is no significant change in terms of phase assemblage. The main properties of LC3 are also described. LC3 blends show a lower creep compliance and a delay in shrinkage strains compared with plain cement. Concerning durability, LC3 blends show outstanding performance with respect to resisting chloride ingress and expansion from the alkali–silica reaction.
1 June 2016 in Journal of Cleaner Production
1 January 2017 in Development Engineering
IMInocencio R. Sánchez Machado
Inocencio R. Sánchez Machado
+2
This paper aims at assessing the return on investment and carbon mitigation potentials of five investment alternatives for the Cuban cement industry in a long-term horizon appraisal (15 years). Anticipated growing demand for cement, constrained supply and an urgent need for optimisation of limited capital while preserving the environment, are background facts leading to the present study. This research explores the beneficial contribution of a new available technology, LC3 cement, resulting from the combination of clinker, calcined clay and limestone, with a capacity of replacing up to 50% of clinker in cement. Global Warming Potential (GWP) is calculated with Life Cycle Assessment method and the economic investment's payback is assessed through Return on Capital Employed (ROCE) approach. Main outcomes show that projected demand could be satisfied either by adding new cement plantsâat a high environmental impact and unprofitable performanceâ or by introducing LC3 strategy. The latter choice allows boosting both the return on investment and the production capacity while reducing greenhouse gas (GHG) emissions up to 20â23% compared to business-as-usual practice. Overall profitability for the industry is estimated to overcome BAU scenario by 8â10% points by 2025, if LC3 were adopted. Increasing the production of conventional blended cements instead brings only marginal economic benefits without supporting the needed increase in production capacity. The conducted study also shows that, in spite of the extra capital cost required for the calcination of kaolinite clay, LC3 drops production costs in the range of 15â25% compared to conventional solutions. Keywords: Cement, Alternative, ROCE, CO2, LCA, Investmen
11 November 2013 in Soft Matter
Geopolymers are presented in many studies as alternatives to ordinary Portland cement. Previous studies have focused on their chemical and mechanical properties, their microstructures and their potential applications, but very few have focussed on their rheological behaviour. Our work highlights the fundamental differences in the flow properties, which exist between geopolymers made from metakaolin and Ordinary Portland Cement (OPC). We show that colloidal interactions between metakaolin particles are negligible and that hydrodynamic effects control the rheological behaviour. Metakaolin-based geopolymers can then be described as Newtonian fluids with the viscosity controlled mainly by the high viscosity of the suspending alkaline silicate solution and not by the contribution of direct contacts between metakaolin grains. This fundamental difference between geopolymers and OPC implies that developments made in cement technology to improve rheological behaviour such as plasticizers will not be efficient for geopolymers and that new research directions need to be explored.
1 June 2013 in Cement and Concrete Research