Cellulose nanoparticles (CNPs) were prepared from microcrystalline cellulose using two concentration levels of sulfuric acid (i.e., 48 wt% and 64 wt% with produced CNPs designated as CNPs-48 and CNPs-64, respectively) followed by high-pressure homogenization. CNP-reinforced polymethylmethacrylate (PMMA) composite films at various CNP loadings were made using solvent exchange and solution casting methods. The ultraviolet-visible (UV-vis) transmittance spectra between 400 and 800 nm showed that CNPs-64/PMMA composites had a significantly higher optical transmittance than that of CNPs-48/PMMA. Their transmittance decreased with increased CNP loadings. The addition of CNPs to the PMMA matrix reduced composite’s coefficient of thermal expansion (CTE), and CNPs-64/PMMA had a lower CTE than CNPs-48/PMMA at the same CNP level. Reinforcement effect was achieved with the addition of CNPs to the PMMA matrix, especially at higher temperature levels. CNPs-64/PMMA exhibited a higher storage modulus compared with CNPs-48/PMMA material. All CNP-reinforced composites showed higher Young’s modulus and tensile strengths than pure PMMA. The effect increased with increased CNP loadings in the PMMA matrix for both CNPs-64/PMMA and CNPs-48/PMMA composites. CNPs affected the Young’s modulus more than they affected the tensile strength.
Green poly(ethylene oxide) (PEO)/cellulose nanocrystals (CNCs)/poly(vinylpyrrolidone) (PVP) composites were prepared via electrospinning technique. The use of PVP and/or CNCs improved the overall thermal stability and mechanical properties of the PEO fibers. A strong synergistic reinforcing effect was achieved when PVP polymer and CNCs were combined in the composite. This synergistic reinforcement was accompanied with the formation of unique fiber-bead-fiber morphology. The beads were elongated and orientated along the applied force direction during tensile testing, providing an energy dissipation mechanism and a positive reinforcement effect. The combination of CNCs with PVP induced special chemical interactions, and distracted the interactions between PVP and PEO. As a result, the crystallinity of PEO was increased in the system, which also helped enhance fiber properties. The approach developed in this work offers a new way for reinforcing electrospun PEO-based composite fibers for sustainable green composite development.