Thomas Holzfeind

Thomas Holzfeind

Auto-generated profile, based on publicly available information

Thomas Holzfeind

University of Natural Resources and Life Sciences Vienna

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 June 2020 in Current Forestry Reports
Verified
Journal Article
Open access
PDF file
THThomas Holzfeind
Thomas Holzfeind
RVRien Visser
Rien Visser
Woodam ChungWoodam Chung
Woodam Chung
FHFranz Holzleitner
Franz Holzleitner
GEGernot Erber
Gernot Erber
Purpose of Review: Winch-assist systems have seen rapid development, adoption, and implementation in many parts of the world in the past decade and can be considered one of the major recent innovations in steep terrain harvesting. Though a comparatively young topic, the literature around this topic has grown considerably during the last decade. This review summarizes the present body of literature on winch-assist systems and provides a comprehensive introduction to the topic. Recent Findings: The analysis showed that work safety in steep terrain harvesting operations has increased through winch-assist systems by removing workers from the many hazards of manual and motor-manual work. The extent of rutting, subsequent erosion, and soil densification after working with winch-assist systems was found to be similar to operations on gentle terrain or cable logging. Winch-assist harvesting is considered more productive than conventional steep terrain harvesting. While case studies provide indicative utilization and productivity values, a robust understanding of economic viability under varied stand and terrain conditions is not yet well established. Summary: Winch-assist is proving to be a robust, safe, and high-performance forest harvesting technology that has increased the operating range of ground-based, mechanized harvesting. It can help increase access to forest grounds in steep terrain that are previously considered economically marginal for forest management. Besides steep terrain, the potential benefits of winch-assist in reducing soil disturbance from ground-based equipment indicate that its operating range can also expand to gentle terrain where environmental impacts are of great concern due to wet or unstable soils. As the technology is relatively young and still evolving, there are many unknown social, environmental, and economic challenges and opportunities associated with the winch-assist technology. More research is certainly warranted.

12 June 2018 in Journal of Forest Research
Verified
Journal Article
Closed access
THThomas Holzfeind
Thomas Holzfeind
KSKarl Stampfer
Karl Stampfer
FHFranz Holzleitner
Franz Holzleitner
In fully mechanized cut-to-length timber harvesting operations, the forwarder represents the limiting machine on steeper terrain in terms of trafficability. In order to operate also on steep terrain and on soft soils with low traction they can be equipped with traction winches. The objective of this study was to investigate setup time, develop a productivity model and calculate extraction costs for the winch-assisted forwarder John Deere 1110E. The productivity model is based on 75 observed cycles within 18 skid trails. The study was carried out in three different stands using detailed productivity and process analyses. Factors, which influence machine productivity, are piece volume (pv), inclination, distance during loading activities and extraction distance. With an average observed pv of 0.10 m3 and an average load volume of 9.25 m3, the winch-assisted forwarder reached a productivity of 13.7 m3/PSH15, according to the developed model. By an annual utilization of 1,900 h and system costs for the entire machinery of 110.68 €/PSH15, forwarding costs 8.06 €/m3. The detailed time and motion study showed different possibilities for mounting the cable depending on operation direction, terrain, passability through the stand and availability of the harvester. Average setup time for the cable operating downhill was 21.6 min, which additionally caused costs of 1.03 €/m3.

19 November 2020 in International Journal of Forest Engineering
Verified
Journal Article
Open access
MSMarian Schönauer
Marian Schönauer
THThomas Holzfeind
Thomas Holzfeind
SHStephan Hoffmann
Stephan Hoffmann
FHFranz Holzleitner
Franz Holzleitner
BHBastian Hinte
Bastian Hinte
DJDirk Jaeger
Dirk Jaeger
Recently, forest operations are facing unfavorable climatic conditions more frequently. In Central Europe, machine trafficability and induced soil disturbances are negatively affected by periods of high precipitation and less intensive frost during ground-based harvesting operations. Winch-assist technology is assumed to reduce soil disturbance by forest machines in steep terrain. Still, the potential positive effects of winches to assist traction of forest machines in flat terrain have rarely been surveyed. In this study, a field trial was conducted in flat terrain (slope < 5%). There, a forwarder with an integrated traction-assist was monitored during six consecutive machine passes on a permanent machine operating trail. The first section of the machine operating trail was passed without traction-assist, the remaining section with traction-assist, resulting in two treatment groups. To assess soil impacts, three test plots were positioned per treatment group. Within these plots, pre- and post-operational soil bulk density, soil displacement and rutting were determined. Additionally, wheel slippage and cable tensile force were examined, using incremental rotary encoders and a flexible tensile force measurement kit, respectively. It was observed, that wheel slippage responded inversely with tensile force. Traction-assist technology reduced wheel slippage from 5.3 ± 11.9% to 0.37 ± 10.19% along the section of the machine operating trail, as compared to results from the unassisted section. Although wheel slippage was significantly reduced, no mitigating effect by the usage of traction-assist technology on soil disturbance could be observed, probably due to the low volumetric water content of 27%.

13 December 2020 in International Journal of Forest Engineering
Verified
Journal Article
Open access
THThomas Holzfeind
Thomas Holzfeind
CKChristian Kanzian
Christian Kanzian
MGManfred Gronalt
Manfred Gronalt
In the steep terrain of the European Alps, cable yarding still plays an important role. To maintain low costs of timber harvesting and improve the productivity of cable yarding operations, system integration by mounting of a tower yarder, crane, and processing unit onto a single carrier is the major pathway of innovation. In particular, under mountainous conditions, with small landings at the forest road and high production rates, cable yarding systems require well-coordinated transport to available storage space at the landing. Otherwise, the operation will run out of storage space and be shut down until serviced by a log truck. To investigate the system behavior and determine the overall performance effects, an agent-based simulation model was developed. The impact of the storage capacities, number of trucks employed, weather conditions, and timing of truck orders were evaluated. Cable yarders, trucks, and individual yarding lines form a population of agents placed in the spatial model environment, acting as the top-level agent. To harvest and transport an assumed volume of 52,500 m3 of timber from 65 different harvesting sites with 150 yarding lines, 301 days are required, in the best case. For the worst case, 484 days are required to complete all operations. Early information flow of the storage level at the landing saves a majority of the waiting cost if the storage capacity at the road is low and the number of trucks high, with 2.5 € m−3. The results also show that adopting measures to increase the storage capacity at the landing will lead to less sensitive reactions in the supply chain.

19 July 2019 in Croatian journal of forest engineering
Verified
Journal Article
Open access
THThomas Holzfeind
Thomas Holzfeind
CKChristian Kanzian
Christian Kanzian
Karl StampferKarl Stampfer
Karl Stampfer
FHFranz Holzleitner
Franz Holzleitner
Winch-assisted forwarders are now commonly accepted as an innovative alternative for extracting wood on challenging terrain. In order to assess safety risks, it is necessary to know the tensile forces in the steel wire rope and their interaction with the machine tilt under real working conditions. In this study, the tensile force and the machine tilt of two winch-assisted forwarders (John Deere 1210E and Komatsu 840TX) were observed for about 15 work hours without delays on two different stands in Austria. The tensile force data and the machine tilt data were separated by work elements. The mean tensile force ranged from 18.1 kN for unloading up to 56.8 kN for loading activities. During the measurements, the cable tensile force exceeded 50% of the minimum breaking strength (MBS) only twice. The maximum observed tensile force was 174.5 kN or 82.7% of the MBS, respectively, which led to a failure of the steel cable. For the machine tilt, a maximum of 80% was measured during loading and driving during loading. John Deere 1210E was operated 31% of the productive work time above the manufacturers tilt limit. For Komatsu 840TX, the manufacturers’ maximum tilt limit was exceeded only twice. The study also showed that peaks with an amplitude of up to 50 kN can occur within a few centiseconds, which highlights the need of high measurement rates, when measuring cable tensile force of winch-assisted machinery. The detailed analysis of the peaks showed that 90% of the pit-to-peak amplitudes ≥20 kN occurred during driving activities. Only 10% of pit-to-peak amplitudes ≥20 kN were measured during loading activities, although loading took about 43.5% of the productive work time. As such, the study results confirm that amplitudes of peaks in tensile force, and hence safety risks, are significantly higher during driving than during loading.