Laser scanning does not provide unlimited geometrical accuracy and integrity when scanning complex objects. Scanning systems have a minimum and maximum range in which they operate, depending on the technical characteristics. Scanning below or above these limits results in gross errors and registering of incorrect data. Laser scanners can have difficulties with certain materials such as marble and reflective surfaces. This paper presents the results of laser scanning of a complex monument of cultural and historical heritage using two different types of terrestrial laser scanners. Afterwards, the comparison and analysis of the results are shown. The scanners used were terrestrial laser scanners Faro Focus 3D (phase mode distance measurements) and STONEX X300 (pulse mode distance measurements).
19 October 2023 in Environmental Monitoring and Assessment
During the period of one hundred years photogrammetry has had and still has a very important role in the documentation of cultural heritage. Selecting proper technologies enabled the protection, preservation and valorisation of architectural, archaeological and other forms of cultural heritage. Many recent technological breakthroughs have improved photogrammetry, as a tool for capturing, allowing a representation of much more complicated objects. In this way the faithful representation of the real world as a fast flow of information from the experts to the user has been secured. This paper explains the importance of preserving and documenting the cultural and historical heritage. Interesting examples of documenting the cultural and historical heritage of the world and Bosnia and Herzegovina are given, using close-range photogrammetry and laser scanning.
Terrestrial laser scanners (TLS) are widely employed in structural health monitoring (SHM) of large objects due to their superior capabilities compared to traditional geodetic methods. TLS provides rapid and detailed data on the geometric properties of objects, enabling various types of analyses. In this study, TLS was utilized to examine the minaret of the Bjelave Mosque, located in Sarajevo, Bosnia and Herzegovina. The inclination of the minaret was assessed using principal component analysis (PCA) and linear regression (LR) applied to sampled data from four edges of the minaret’s body. The geodetically determined inclination values were used as input data for subsequent static and pushover analyses conducted in DIANA FEA, where the minaret was modeled. The analyses indicate that the inclination increases stress and strain, leading to larger cracks and reduced structural capacity, as demonstrated by the pushover analysis curves. This study highlights the combined impact of structural inclination, water infiltration, and settlement on the minaret’s integrity and proposes these findings as a basis for future maintenance and strengthening measures.
Single-beam echo sounders have gained popularity for various applications due to their compact dimensions, ease of use, and cost-effectiveness. The question that often arises among the users is whether these devices can fulfill the necessary accuracy requirements. This paper concentrates on assessing the accuracy that can be achieved using a single-beam echo sounder. An accuracy assessment was performed by comparing the depths derived from the 3D model created from the single-beam echo sounder data to those obtained through more accurate and independent method (tacheometric surveying) in the test area. Accurate depth determination was achieved through trigonometric leveling, employing a specific methodology that allows for precise depth measurements up to 4.5 meters. The assessment results were compared to the vertical accuracy requirements for surveying and mapping in shallow waters, recommended by the International Hydrographic Organization. The results indicate that, with a 95% probability, the depths determined by the single-beam echo sounder meet the total vertical uncertainty (TVU) requirements specified by the S-44 standard for Order 1a survey.