In situ generation of indium catalyst droplets and subsequent growth of crystalline silicon nanowires on ITO by plasma-enhanced CVD are reported, and the wurtzite (Si–IV) phase is clearly evidenced in some wires.
11 September 2014 in Journal of Physics D: Applied Physics
Incorporation of nanostructures is a recent trend in the photovoltaic community, aimed at improving light absorption and consequently cell efficiency. In this regard, semiconductor nanowires provide an attractive research platform for a new generation of cost-effective and efficient solar cells. Thanks to their unique geometry, silicon nanowires enhance light trapping and anti-reflection effects by means of multiple scattering between individual nanowires, and by coupling the light into confined eigenmodes over a broad range of the solar spectrum. Moreover, radial junction solar cells built around nanowires decouple the light absorption and carrier collection directions, which allows for a higher internal field and better carrier collection. Thus, arrays of radial junction solar cells bring advantages of high efficiency with reduced material amount. This is particularly attractive for devices based on hydrogenated amorphous and microcrystalline silicon thin films. In this paper, after reviewing different approaches to fabricate silicon nanowires, we focus on nanowires grown using the plasma-assisted vapour–liquid–solid method because of the simplicity and compatibility with current silicon thin-film technology. Their application to a-Si : H based radial junction solar cells has already resulted in ∼8% of stable devices with an absorber layer thickness of only 100 nm. Moreover, current challenges and perspectives such as the use of a microcrystalline silicon absorber are also reviewed.
We report on a guided growth of silicon nanowires (SiNWs) based on an in-plane solid-liquid-solid mechanism, which provides a general strategy to deploy SiNWs precisely into desired circuits. During a reacting-gas-free annealing process, the SiNWs are activated to grow and be guided into predefined patterns by effective controlling the movement of the catalyst drops. We demonstrate three different approaches to achieve a guided growth of SiNWs, which are as follows: (1) by an a-Si:H channel, (2) by a step edge, and (3) by an a-Si:H edge. These results provide a design principle for future SiNWs-based nanodevices.
We here propose an all-in situ method for growing vapor-liquid-solid (VLS) silicon nanowires (SiNWs) directly on SnO(2) substrates in a plasma-enhanced chemical vapor deposition system. The tin catalysts are formed by a well-controlled H(2) plasma treatment of the SnO(2) layer. The lowest temperature for the tin-catalyzed VLS SiNWs growth in a silane plasma is ∼250 °C. The effects of substrate temperature and H(2) dilution of silane on the morphology and compositional evolution of the SiNWs were systematically investigated. The catalyst content in the SiNWs can be effectively controlled by the deposition temperature. Moreover, enhanced absorption (down to ∼1.1 eV) is achieved due to the strong light trapping and anti-reflection effects in the straight and long tapered SiNWs.