15 March 2011 in Journal of Applied Physics
This review is focused on the latest developments in continuous-wave (CW) photomixing for Terahertz (THz) generation. The first part of the paper explains the limiting factors for operation at high frequencies ∼ 1 THz, namely transit time or lifetime roll-off, antenna (R)-device (C) RC roll-off, current screening and blocking, and heat dissipation. We will present various realizations of both photoconductive and p-i-n diode–based photomixers to overcome these limitations, including perspectives on novel materials for high-power photomixers operating at telecom wavelengths (1550 nm). In addition to the classical approach of feeding current originating from a small semiconductor photomixer device to an antenna (antenna-based emitter, AE), an antennaless approach in which the active area itself radiates (large area emitter, LAE) is discussed in detail. Although we focus on CW photomixing, we briefly discuss recent results for LAEs under pulsed conditions. Record power levels of 1.5 mW average power and conversion efficiencies as high as 2 × 10−3 have been reached, about 2 orders of magnitude higher than those obtained with CW antenna-based emitters. The second part of the paper is devoted to applications for CW photomixers. We begin with a discussion of the development of novel THz optics. Special attention is paid to experiments exploiting the long coherence length of CW photomixers for coherent emission and detection of THz arrays. The long coherence length comes with an unprecedented narrow linewidth. This is of particular interest for spectroscopic applications, the field in which THz research has perhaps the highest impact. We point out that CW spectroscopy systems may potentially be more compact, cheaper, and more accurate than conventional pulsed systems. These features are attributed to telecom-wavelength compatibility, to excellent frequency resolution, and to their huge spectral density. The paper concludes with prototype experiments of THz wireless LAN applications. For future telecommunication systems, the limited bandwidth of photodiodes is inadequate for further upshifting carrier frequencies. This, however, will soon be required for increased data throughput. The implementation of telecom-wavelength compatible photomixing diodes for down-conversion of an optical carrier signal to a (sub-)THz RF signal will be required.
25 June 2007 in Optics Letters
The evolution of surface morphology of tungsten irradiated by single-beam femtosecond laser pulses is investigated. Ripplelike periodic structures have been observed. The period of these ripples does not show a simple relation to the wavelength and angle of incidence. The orientation of ripples is aligned perpendicularly to the direction of polarization for linearly polarized light. Surprisingly, we find that the alignment of the ripple structure turned left or right by 45° with respect to the incident plane when using right and left circularly polarized light, respectively. The period of the ripple can be controlled by the pulse energy, the number of pulses, and the incident angle. We find a clear threshold for the formation as a function of pulse energy and number of pulses. The mechanism for the ripple formation is discussed, as well as potential applications in large-area structuring of metals.
21 May 2007 in Applied Physics Letters
The authors report on photomixing terahertz sources that overcome the transit time versus -time trade-off and allow for independent optimization of both of them, using a superlattice. Furthermore, they take advantage of ballistic transport for reduced transit times. Apart from more favorable material parameters, In(Al)GaAs photomixers benefit from the advanced telecommunication laser technology around as compared to GaAs. In such devices, a terahertz-power output of has been achieved at at a photocurrent of . A comparison between corresponding GaAs- and InGaAs-based photomixers reveals an improvement of performance by at least an order of magnitude for the latter one.
6 May 2008 in Optics Express
We report on coupling of two whispering gallery mode resonators in the Terahertz frequency range. Due to the long wavelength in the millimeter to submillimeter range, the resonators can be macroscopic allowing for accurate size and shape control. This is necessary to couple specific modes of two or more resonators. Sets of polyethylene (PE) and quartz disk resonators are demonstrated, with medium (loaded) quality (Q)-factors of 40-800. Both exhibit coinciding resonance frequency spectra over more than ten times the free spectral range. Loading effects of single resonators are investigated which provide strong Q-factor degradation and red-shifts of the resonances in the 0.2% range. By coupling two resonators of the same size, we observe mode splitting, in very good agreement with our numerical calculations.
8 June 2005 in Semiconductor Science and Technology
17 September 2007 in Applied Physics Letters
Nanoscale ripple structures with spatial periods of up to are generated by a single beam ultrashort pulsed laser structuring of surface. The period of nanoripples does not depend on the laser fluence and the number of pulses. Optical absorption and photocurrent measurements on SiC samples are investigated before and after laser nanostructuring. Nearly 40% enhancement of optical absorption and a factor of 3 increase of photocurrent are achieved after laser nanostructuring.