7 July 2015 in Journal of Electromagnetic Waves and Applications
The modified waveguide-fed dipole-like antenna is designed using the induced emf method. To excite the antenna arms, the two equal in magnitude and 180° and out-of-phase excitations are created using the standard rectangular waveguide. Since the area around the radiating arms is free of any conductors (exception for a finite ground plane), the antenna radiation is of high polarization purity. The stand-alone antenna operating near 1.7 GHz was fabricated and tested to verify the design validity. Both the far-field pattern and the return loss level show good agreement with the designed parameters. Such antenna is optimal for using as a building block in the linearly polarized assemblies as well as the stand-alone radiators.
1 November 2016 in Pacific Science Review A: Natural Science and Engineering
A novel coupled-line-free wideband bandpass/bandstop filter configuration is designed and tested. The filter is based on a reentrant structure with unequal dielectric constants for the internal and external fillings. As a result, additional symmetrical transmission zeros are generated in the lower and upper stop bands of the bandpass filter; this leads to an elliptic function response and improvement of the pass band and selectivity. Similar conclusions are made about the bandstop filter in terms of the return loss. The general TEM circuit model, in terms of the two-port series connection, is presented for the proposed filters, and then, it is used to determine its electrical parameters. The experimental prototype was fabricated using conventional printed circuit board technology. The measured S-parameters show acceptable agreement with the analytical and full-wave simulations, showing promising potential for different applications.