20 July 2007 in Lab on a Chip
This paper presents a hybrid micropump actuated by the up–down motion of a dome shaped cell-polymer membrane composite. The contractile force induced from self-beating cardiomyocytes cultured on the membrane causes shrinkage and relaxation of a microchamber, leading to a flow in a microchannel. Flow direction is controlled by the geometry of diffuser/nozzle in the microchannel. The fabrication process is noninvasive to cells, thus, cardiomyocytes can robustly maintain their activity for a long time. The fluid motion in the microchannel was monitored by tracking 2 µm polystyrene beads. A net flow rate of 0.226 nl min−1 was obtained in our microscale device. Our device demonstrates a unique performance of a cell–microdevice hybrid lab-on-a-chip that does not require any external power source, preventing electrical or heat shock to analytes.
19 September 2005 in Lab on a Chip
An efficient 3D-asymmetric microelectrode system for high-throughput was designed and fabricated to enhance sorting sensitivities to the dielectric properties—size, morphology, conductivity, and permittivity—of living cells. The principle of the present system is based on the use of the relative strengths of negative dielectrophoretic and drag forces, as in a conventional 3D-microelectrode system. Whereas the typical 3D-microelectrode system has a constant electric field magnitude due to the constant width of the microelectrodes and a fixed gap between face-to-face microelectrodes, the present 3D-asymmetric microelectrode system has electric fields of continuously varying magnitudes along the transverse direction of a channel owing to the changing widths of the electrodes in the half-circular shaped cross section of the microchannel. Thus, varying dielectric forces are generated, leading to increased sorting sensitivity through differentially induced forces to definitely distinct cell types. Numerical analysis verified the improved sensitivity of the present system for sorting living cells. The feasibility of using the newly fabricated system under experimental conditions was tested by demonstrating that a mixed population of mouse P19 embryonic carcinoma (EC) and red blood cells (RBCs) was effectively sorted to different wells depending on their respective relative physical properties.
1 April 2007 in Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164)
Recently, the capsule endoscope can be widely used for the diagnosis of digestive organs. It is passively moved by the peristaltic waves of gastro-intestinal tract and thus has some limitations for doctor to get the image of the organ and to diagnose more thoroughly. As a solution of these problems, therefore, a locomotive mechanism of capsule endoscopes has being developed. Our proposed capsule-type microrobot has synchronized multiple legs that are actuated by a linear actuator and two mobile cylinders inside of the capsule. By the novel kinematic relation between the legs and the mobile cylinders, the microrobot can easily move forward in the gastro-intestine. For the feasibility test of the proposed locomotive mechanism, a series of experiments were carried out including in-vitro and in-vivo tests. Based on the experimental results, we conclude that the proposed locomotive mechanism is not only easy to be used for micro capsule endoscopes but also effective to move inside of intestinal tract.
1 July 2006 in Journal of Mechanical Science and Technology