3 December 2010 in IEEE Transactions on Microwave Theory and Techniques
JJJosé Luis Jimenez-Martin
VGVicente Gonzalez-Posadas
In this paper, differential low-noise amplifiers are presented as a very powerful solution for radio astronomy applications. A fully differential amplifier topology has been analyzed and implemented in microstrip technology with discrete surface mount components. The amplifier design is made for an active receiving dense antenna array. Thus, the differential amplifier source impedance is no longer 50 Ω, but 150 Ω from the proposed bunny-ear antennas. A full characterization in terms of gain and noise has been undertaken. Source-pull measurements have been included in order to evaluate the performance of the amplifiers operating with variable source impedances. Noise temperatures below 55 K have been obtained for the differential design in the 300-1000-MHz band for the 150-Ω impedance. In addition, the results for different scanning angles are also presented.
17 April 2009 in IEEE Transactions on Microwave Theory and Techniques
VGVicente Gonzalez-Posadas
Unique properties exhibited by metamaterial transmission lines have been previously used to design a large number of dual-band microwave passive devices, but not active ones. In this paper, a novel dual-band active filter scheme based on composite right/left-handed transmission lines is proposed. The inclusion of these types of lines as feedback sections in a first-order recursive topology can be used to generate a filtering response with two arbitrary passbands. Additionally, dual-band couplers are also required. These may be implemented by means of stub-loaded branch-line structures. As an added advantage, these elements produce a strong rejection level at the central stopband that improves the overall response. Theoretical analysis and design procedures are verified by means of manufacturing and measurement of a prototype containing a distributed amplifier.
1 January 2010 in Progress In Electromagnetics Research
In this paper, a novel dual-band active filter topology is presented. The non-linear phase response of a composite right/left-handed cell is used to achieve the desired dual-band performance. Additionally, the proposed structure based on coupled ring resonators yields a very compact solution in which high-order implementations can be easily obtained by cascading multiple rings. The theoretical principles of this type of filters are analyzed in detail. Finally, three prototypes based on first-, second- and third-order structures validate the feasibility of this type of filters. Good agreement between simulations and measurements has been achieved
19 December 2016 in Semiconductor Science and Technology
The performance of gallium nitride transistors is still limited by technological problems often related to defects and traps. In this work, virgin AlGaN/AlN/GaN HEMTs exhibiting an anomalous DC behavior accompanied by frequency dispersion in the microwave range, both in the transconductance and output conductance, are analyzed. This anomalous response, which is mitigated by high-bias conditions, is attributed to the presence of traps and defects both in the volume of the GaN channel and in the source and drain contacts. A simple equivalent circuit model is proposed to replicate the dispersive response of the transistor, achieving an excellent agreement with the measured S parameters and thus providing relevant information about its characteristic frequency.
10 February 2011 in IEEE Microwave and Wireless Components Letters
VGVicente Gonzalez-Posadas
This letter presents a novel recursive active filter topology that provides dual-band performance, with independent tuning capability in both bands. The dual-band operation is achieved by using two independent feedback lines. Additionally, linear phase shifters based on left-handed cells are included in these two branches in order to tune the center frequency of both pass bands.
8 January 2015 in Semiconductor Science and Technology
In this contribution we present the results from the simulation of an AlGaN/GaN heterostructure diode by means of a Monte Carlo tool where thermal effects have been included. Two techniques are investigated: (i) a thermal resistance method (TRM), and (ii) an advanced electro-thermal model (ETM) including the solution of the steady-state heat diffusion equation. Initially, a systematic study at constant temperature is performed in order to calibrate the electronic model. Once this task is performed, the electro-thermal methods are coupled with the Monte Carlo electronic simulations. For the TRM, several values of thermal resistances are employed, and for the ETM method, the dependence on the thermal-conductivity, thickness and die length is analyzed. It is found that the TRM with well-calibrated values of thermal resistances provides a similar behavior to ETM simulations under the hypothesis of constant thermal conductivity. Our results are validated with experimental measurements finding the best agreement when the ETM is used with a temperature-dependent thermal conductivity.