In this letter, open complementary split ring resonators (OCSRRs) are introduced for the first time. Such resonators are the dual counterparts of the open split ring resonators (OSRRs), introduced in 2004 by some of the authors, and consist on a pair of concentric hooks etched on a metal layer in opposite orientation. It is shown in the letter that OCSRRs can be modeled by means of an LC parallel resonant tank and that this particle roughly exhibits half the resonance frequency of the complementary split ring resonator (CSRR), hence being electrically very small. The interest of these resonators is illustrated through their application to a wideband coplanar waveguide band pass filter.
6 September 2019 in IEEE Transactions on Antennas and Propagation
A differential-mode sensor based on a pair of electroinductive wave transmission lines (EIW-TLs) is proposed in this article. The EIW-TLs are implemented by etching a chain of complementary split-ring resonators (CSRRs) in a metallic plate. Such metallic plate acts as the ground plane of the microstrip (access) lines, necessary for feeding each EIW-TL and collecting the transmitted power at the output ports. The working principle of the sensor is mode conversion, caused when the EIW-TLs are asymmetrically loaded. Thus, one of the lines is loaded with the reference (REF) sample, whereas the other one is loaded with the sample under test (SUT). If both samples are identical and the pair of EIW-TLs is fed by a common-mode signal, a pure common-mode signal is collected at the differential output port. Conversely, mode conversion arises when the lines are unequally loaded, due to the different propagation characteristics (particularly the phase velocity) of the lines. Due to the typical dispersion relation of the EIW-TLs, with strong variation in the phase velocity (or phase constant) with frequency, the structure is very sensitive to dielectric constant differences between the REF and SUT samples. Thus, the proposed structure is useful for the accurate measurement of dielectric constants (sensor functionality) and the detection of tiny differences between the REF and SUT samples (comparator functionality).
13 November 2009 in IEEE Transactions on Microwave Theory and Techniques
This paper is focused on the application of open split ring resonators (OSRRs) and their dual counterparts, open complementary split ring resonators (OCSRRs), to the synthesis of composite right/left-handed transmission lines, that is, artificial lines exhibiting backward wave propagation at low frequencies and forward wave propagation at high frequencies. Due to the small dimensions of these resonators, the resulting lines are very compact. Several artificial lines, with different electrical characteristics and topologies, are reported as illustrative examples. It is shown that these artificial lines can be applied to the synthesis of dual-band components and bandpass filters, and two prototype device examples are designed and fabricated in coplanar waveguide technology: a dual-band impedance inverter applied to a dual-band power divider, and an order-3 wide-band bandpass filter. Finally, it is also demonstrated that OSRRs and OCSRRs can be combined for the synthesis of band pass filters in microstrip technology. Since OSRRs and OCSRRs are described by means of series and shunt resonant tanks, respectively, and they are electrically small, their potential to the design of semi lumped planar microwave devices is very high.
It is shown that open complementary split ring resonators (OCSRRs) are useful particles for the design of lowpass filters with very narrow transition bands in microstrip technology. Owing to the small electrical size of OCSRRs, the filters are also very small. These filters are implemented by cascading several OCSRR stages in a microstrip line. The OCSRR stages can be modelled as parallel resonators in series configuration, thus providing a transmission zero at their resonance frequency. By designing the OCSRRs with small inductance and high capacitance, very sharp cutoffs are achieved. To illustrate the possibilities of the approach, a prototype device example is provided. It consists on a five-stage periodic microstrip lowpass filter with 3 dB insertion losses at 1.33 GHz and 40 dB rejection at 1.45 GHz. To improve out-of-band rejection, four additional OCSRR stages tuned at the spurious frequency band have been cascaded. Filter dimensions are 39×7.4 mm (i.e. 0.46λ× 0.087λ, where λ is the guided wavelength at the cutoff frequency). These filters are of interest in applications where small size and severe cutoff requirements are required.
21 February 2011 in IET Microwaves, Antennas & Propagation
In this study, the authors show that open split ring resonators (OSRRs) and open complementary split ring resonators (OCSRRs) can be loaded with varactor diodes in order to implement tunable filters in coplanar waveguide (CPW) technology. By loading a CPW with shunt-connected varactor-loaded OSRRs, a band-stop filter with tunable central frequency results. The electronically tunable band stop can be switched to a pass band by replacing the shunt resonators with varactor-loaded OCSRRs. To illustrate the possibilities of the approach, a tunable band-stop filter and a tunable band-pass filter have been designed and fabricated. The measured characteristics are in good agreement with the co-simulations (electric and electromagnetic) and with the circuit simulations of the electric model. The measured tuning range is roughly 120% for the stop-band structure (for varying voltages between 0 and 28 V) and over 30% for the band-pass filter (for varying voltages between 5 and 25 V).
20 October 2009 in IEEE Microwave and Wireless Components Letters
In this letter, an elliptic low-pass filter (LPF) implemented in coplanar waveguide (CPW) technology by etching open complementary split ring resonators (OCSRRs) in the central strip is presented for the first time. The OCSRRs behave as series connected parallel resonant tanks, whereas metallic patches etched in the back side of the substrate provide the required shunt capacitance to achieve the elliptic function response. An order-5 elliptic LPF has been designed and fabricated to illustrate the possibilities of this new approach. The measured frequency response is in good agreement with the ideal elliptic function up to twice the cutoff frequency ( fc =1& GHz). Since OCSRRs are electrically small resonators, filter dimensions are also small (device length is 2.5 cm, namely 0.13 lambda , where lambda is the guided wavelength at fc ). This work is illustrative of the possibilities of OCSRRs for the design of compact planar filters and other microwave components.