The chemical and mineral composition, physico-mechanical properties of sulfoaluminate cements of various classes of strength manufactured in China which are used in Russia to build and repair buildings and structures have been considered. It is shown that the sample sulfoaluminate cement depending on the strength class differ not only in chemical and mineral compositions, but also in their hydrophysical properties, kinetics of dissipation and hardening of cement, and hydration products. It is established that with the increasing strength class of the cement content it has calcium increases, the adhesion of the cement paste is slowed down, the duration of heat dissipation increases, the temperature dissipation is reduced, the hardening of the cement stone slows down.
The phase transformations of eudialyte concentrate during the carbothermic reduction in the temperature range 25–2000°C are studied by thermodynamic simulation, differential thermal analysis, and X-ray diffraction. As the temperature increases to 1500°C, the following phases are found to form sequentially: iron and manganese carbides, free iron, niobium carbide, iron silicides, silicon and titanium carbides, and free silicon. Strontium, yttrium, and uranium in the temperature range under study are not reduced and are retained in an oxide form, and insignificant reduction of zirconium oxides with the formation of carbide ZrC is possible only at temperatures above 1500°C.
1 January 2018 in Refractories and Industrial Ceramics