16 August 2016 in Obogashchenie Rud
U(Ural Federal University named after the first President of Russia B. N. Yeltsin (Russia)
Ural Federal University named after the first President of Russia B. N. Yeltsin (Russia)
By way of the example of the Pervouralskoye deposit titanium-magnetite ores, a dry treatment method of associated rocks material crushing screenings has been considered, providing for beneficiated sand production for construction purposes. It is noted, that disperse materials screening and hydraulic classification operations, applied at mining facilities, are not suitable for dust removal from crushing screenings. Air sizing of granular materials with application of cascade units is one of the efficient methods of beneficiation. Crossflow classifier design, conditions and main processing parameters of rocks material crushing screenings beneficiation process have been examined. The experimental results of gabbro and hornblendite materials, as well as their mixtures, crushing screenings air sizing by means of the apparatus in question, are presented. Beneficiated sand grain-size distribution was determined. Dependence of final product yield and its dust content upon velocity of air flow passing through classifier, as well as dependence of screenings beneficiation efficiency upon air-and-material particles mixture concentration, are presented. A commercial plant flow sheet is proposed, main parameters of crossflow classifier with the throughput rate from 20 to 100 t/hr are described.
1 July 2018 in Power Technology and Engineering
1 September 2017 in Refractories and Industrial Ceramics
30 July 2016 in Refractories and Industrial Ceramics
24 April 2024 in Bulletin of Belgorod State Technological University named after. V. G. Shukhov
The influence of mineral additives, introduced in an amount of 20% to replace part of the fly ash, on the composition of hydration products and hardening of ash-cement stone after heat and steam curing was studied. The greatest increase in the compressive strength of ash-cement stone is provided by the use of ground granulated blast furnace slag and crushed hornblendite screenings, the introduction of which increases it by 2 times compared to non-additive stone. Differential thermal analysis of ash-cement stone has established that in the presence of blast furnace slag, the basicity of low-basic calcium hydrosilicates of composition CSH(B) decreases, and their amount increases as a result of the binding of portlandite with the active components of the additive and aluminosilicate glass of fly ash. The increased content of low-basic calcium hydrosilicates helps to increase the compressive strength of ash-cement stone. The addition of crushed hornblendite screenings does not change the composition of hydrate formations, and the increase in its strength is due to the high density and strength of rock particles. The introduction of copper smelting slag instead of part of the ash does not contribute to an increase in the content of new hydrate formations in the ash-cement stone, since its components do not interact with the hydration products of portland cement, and the lack of hydraulic activity is due to the low content of calcium and aluminum oxides in it, the presence of a significant amount of chemically inert fayalite and glass phase. The experimental results obtained make it possible to evaluate the effectiveness of the influence of mineral additives on the strength characteristics of ash-cement stone in order to increase the volume and rational use of fly ash from thermal power station as part of composite materials, in the production of foamed aggregate, for example, non-fired fly ash gravel.
3 September 2017 in KnE Materials Science
Composition and regeneration properties of the molding sand mixtures worked out of casting production ‒ quartz sand and dust fraction. The results of the laboratory investigations as to their use in both building and refractory materials composition are presented. The industrial tests have shown the high efficiency of silica rich regenerated products in dinas products manufacture.