4 January 2021 in Chemical Society Reviews
The substantial progress of application of carbon-based catalysts in FTS has been systematically summarized and discussed in this review article.
18 November 2023 in Nature Communications
Complex metal nanoparticles distributed uniformly on supports demonstrate distinctive physicochemical properties and thus attract a wide attention for applications. The commonly used wet chemistry methods display limitations to achieve the nanoparticle structure design and uniform dispersion simultaneously. Solid-phase synthesis serves as an interesting strategy which can achieve the fabrication of complex metal nanoparticles on supports. Herein, the solid-phase synthesis strategy is developed to precisely synthesize uniformly distributed CoFe@FeOx core@shell nanoparticles. Fe atoms are preferentially exsolved from CoFe alloy bulk to the surface and then be carburized into a FexC shell under thermal syngas atmosphere, subsequently the formed FexC shell is passivated by air, obtaining CoFe@FeOx with a CoFe alloy core and a FeOx shell. This strategy is universal for the synthesis of MFe@FeOx (M = Co, Ni, Mn). The CoFe@FeOx exhibits bifunctional effect on regulating polysulfides as the separator coating layer for Li-S and Na-S batteries. This method could be developed into solid-phase synthetic systems to construct well distributed complex metal nanoparticles.
1 September 2018 in Journal of Catalysis
11 October 2018 in Catalysis Science & Technology
Commercial precipitated iron catalysts suffer from severe fragmentation when applied in the Fischer–Tropsch to lower olefins reaction (FTO). Herein, sintered precipitated iron catalysts for FTO are prepared by varying the calcination temperature from 800 to 1400 °C to enhance their fragmentation-resistance ability. Compared with traditional precipitated iron catalysts, sintered precipitated iron catalysts require higher reduction temperatures to maintain high and stable activity and shift the production of hydrocarbons towards lower olefins. Spent sintered precipitated iron catalysts show bulk morphologies with less fragmentation than the fragmented and aggregated morphologies of spent traditional precipitated iron catalysts. The amount of coke inside the spent catalysts decreases from 41.8 to 12.5% as the calcination temperature increases from 500 to 1200 °C, and simultaneously, the chain length of soluble coke decreases from C32 to C21. The lower amount of coke and shorter chain length of soluble coke of the sintered precipitated iron catalysts come from the stronger mechanical strength-induced less space for coke accumulation during FTO, which further enhance the fragmentation-resistance ability of the catalysts.
14 June 2024 in Advanced Materials
Cobalt carbide (Co2C) possesses high catalytic efficiency Fischer–Tropsch synthesis (FTS), while the products selectivity appears sensitive to crystallography geometry. Since the Anderson–Schulz–Flory (ASF) distribution in FTS is broken through fabricating facetted Co2C nanocrystals, yet the underlying mechanism of Co2C crystallization remains unclarified suffering from sophisticated catalyst composition involving promoter agents. Herein, the synthesis of high‐purity single‐crystal nanoprisms (Co2C‐p) for highly efficient FTS is reported to lower olefins. Through comprehensive microstructure analysis, e.g., high‐resolution TEM, in situ TEM and electron diffraction, as well as finite element simulation of gas flow field, for the first time the full roadmap of forming catalytic active cobalt carbides is disclosed, starting from reduction of Co3O4 precursor to CoO intermediate, then carburization into Co2C‐s and subsequent ripening growth into Co2C‐p. This gas‐induced engineering of crystal phase provides a new synthesis strategy, with many new possibilities for precise design of metal‐based catalyst for diverse catalytic applications.