Complex metal nanoparticles distributed uniformly on supports demonstrate distinctive physicochemical properties and thus attract a wide attention for applications. The commonly used wet chemistry methods display limitations to achieve the nanoparticle structure design and uniform dispersion simultaneously. Solid-phase synthesis serves as an interesting strategy which can achieve the fabrication of complex metal nanoparticles on supports. Herein, the solid-phase synthesis strategy is developed to precisely synthesize uniformly distributed CoFe@FeOx core@shell nanoparticles. Fe atoms are preferentially exsolved from CoFe alloy bulk to the surface and then be carburized into a FexC shell under thermal syngas atmosphere, subsequently the formed FexC shell is passivated by air, obtaining CoFe@FeOx with a CoFe alloy core and a FeOx shell. This strategy is universal for the synthesis of MFe@FeOx (M = Co, Ni, Mn). The CoFe@FeOx exhibits bifunctional effect on regulating polysulfides as the separator coating layer for Li-S and Na-S batteries. This method could be developed into solid-phase synthetic systems to construct well distributed complex metal nanoparticles.
Constructing high cycling stability and rate performance under limited or ideally zero sodium excess, namely initially anode-free design, which can obtain the ultimate energy density of sodium metal batteries, is highly desired yet remains challenging. Here, highly ordered and regularly arranged Al(100) single crystal current collector is constructed based on the grain boundary migration theory through a simple high-temperature calcination method, which eliminates the diffusion resistance of Na+ migration at grain boundaries, reduces the nucleation overpotential and interface diffusion energy barrier, increases the Na+ transfer rate, and exhibits uniform reversible sodium deposition capability. Profiting from the modified current collector surface, the Al(100) electrode can be cycled stably for 500 cycles with a Coulombic efficiency of 99.9% (2 mA cm−2/2 mAh cm−2), and its symmetrical cell delivers an adequate Na plating/stripping stability over 2500 h (0.5 mA cm−2/0.5 mAh cm−2) and 1500 h (1 mA cm−2/1 mAh cm−2). The Al(100) current collector enhances the rate performance of the initially anode-free Al(100)‖Na3V2(PO4)3 full battery, enabling it to sustain 100 cycles at a high current density of 1.755 mA cm−2 with a final discharge capacity of 68.0 mAh g−1 (constant current-constant voltage charging protocol).
Employing appropriate single-atom (SA) catalysts in room-temperature sodium-sulfur (Na-S) batteries is propitious to promote the performance, whereas a universal designing strategy for the highly-efficient single-atom catalysts is absent. In this work, we adopt natural language processing techniques to screen the potential single-atom catalysts, then a binary descriptor is constructed to optimize the catalyst candidates. Atomically dispersed cobalt anchored to both nitrogen and sulfur atoms (SA Co-N/S) is selected as an ideal catalyst to significantly facilitate sulfur reduction reaction. The sulfur cathode catalyzed with SA Co-N/S almost realizes complete transformation, and the corresponding pouch cell exhibits satisfactory performance with high mass loading. In-situ X-ray absorption spectroscopy reveals the dynamical interactions between SA Co-N/S and sulfur species in the sulfur reduction reaction. Our work provides a method to select the preferable SA catalyst and to understand the interfacial catalysis dynamics in the sustainable Na-S systems.
Fe(CN)64− vacancies in Prussian blue analog cathodes hinder Na+ transport and trigger side reactions, causing capacity loss. High-quality PBA with fewer defects mitigates this, achieving 81.7% capacity retention over 900 cycles.
2 April 2026 in Angewandte Chemie International Edition