24 December 2025 in IEEE Antennas and Wireless Propagation Letters
This work proposes a novel electromagnetic quantitative inversion scheme for translationally moving targets via phase correlation registration of back-projection (BP) images. Based on a time division multiplexing multiple-input multiple-output (TDM-MIMO) radar architecture, the scheme first achieves high-precision target relative positioning, then applies relative motion compensation to perform iterative inversion on multi-cycle MIMO measurement data, thereby reconstructing the target's electromagnetic parameters. As a general framework compatible with mainstream inversion algorithms, we exemplify our approach by incorporating the classical cross-correlated contrast source inversion (CC-CSI) into iterative optimization step of the scheme, resulting in a new algorithm termed RMC-CC-CSI. Numerical and experimental results demonstrate that RMC-CC-CSI offers accelerated convergence, enhanced reconstruction fidelity, and improved noise immunity over conventional CC-CSI for stationary targets despite increased computational cost.
1 January 2026 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
9 June 2026 in IEEE Antennas and Wireless Propagation Letters
Due to the particularity of beam synthesis, monopulse phased array radar exhibits superior anti-deception performance in angle measurement. Based on the basic principle of sum-difference beams in monopulse phased arrays, this paper constructs a cross-polarization jamming model. This model describes the beam synthesis process of sum-difference beams under cross-polarization jamming, and reveals the jamming mechanism and key jamming parameters of cross-polarization jamming on monopulse phased arrays. To incrase the angle measurement error caused by jamming, a method for selecting jamming parameters is proposed. By adjusting the interference-to-signal ratio (ISR) and phase of cross-polarization jamming, the value of the disturbed sum-beam model is minimized, thereby achieving deviations in angle calculation. Simulations and anechoic chamber experiments verify the accuracy of the proposed model. Seven typical incident angles are selected to verify the effectiveness of the proposed parameters in angle deception. The results show that the effective range of the ISR is greater than 5%, and the effective range of the phase is greater than 8%. Compared with the simulation results, the proposed method has better robustness and achieves a more effective deception effect on the monopulse angle measurement of phased array radar.
1 October 2025 in IEEE Antennas and Wireless Propagation Letters
Cross-polarization (X-Pol) jammming covertly degrades the performance of monopulse angle estimation. This letter outlines a more general model for monopulse angle measurement on the dualpolarization array in the presence of X-Pol jamming. It introduces the mismatched factors between two subarrays to elucidate the theoretical monopulse error induced by X-Pol jamming. To mitigate distortion, a calibration method is proposed that dynamically combines the estimation results from the two polarization channels. In the experiments, the radiation patterns and mismatched factors of the dual-polarization array are measured, and the simulations based on these radiation patterns are conducted. The results validate the accuracy of the proposed model and the effectiveness of the calibration method in practical.
1 June 2026 in IEEE Transactions on Aerospace and Electronic Systems
Existing Synthetic Aperture Radar (SAR) deception jamming methods suffer from high computational complexity, stringent reconnaissance parameter requirements, and severe distortion when generating false large scenes. To overcome these limitations, this paper proposes a spatial-domain reconstruction and approximate compensation jamming (SDRACJ) method. First, we analyze the fundamental principles of the two-dimensional convolutional modulation method and identify its drawbacks, including heavy computational load and strong dependence on precise parameters. To mitigate these issues, we introduce a jamming method based on spatial-domain reconstruction, which reduces the reliance on reconnaissance parameters and enhances computational efficiency through real-time spatial-domain interpolation. However, spatial-domain reconstruction alone introduces distortion in large-scene generation. To address this, we propose an approximate compensation technique that employs sub-template segmentation to improve scene fidelity while maintaining computational efficiency. By integrating spatial-domain reconstruction with approximate compensation, we propose the SDRACJ method, which generates high-quality false large scenes with low computational overhead, minimal distortion, and relaxed reconnaissance parameter demands. Theoretical analysis and simulation results demonstrate the effectiveness of the proposed approach.