26 April 2024 in Chemical Reviews
Traditionally, alkaline water electrolysis (AWE) uses diaphragms to separate anode and cathode and is operated with 5-7 M KOH feed solutions. The ban of asbestos diaphragms led to the development of polymeric diaphragms, which are now the state of the art material. A promising alternative is the ion solvating membrane. Recent developments show that high conductivities can also be obtained in 1 M KOH. A third technology is based on anion exchange membranes (AEM); because these systems use 0-1 M KOH feed solutions to balance the trade-off between conductivity and the AEM's lifetime in alkaline environment, it makes sense to treat them separately as AEM WE. However, the lifetime of AEM increased strongly over the last 10 years, and some electrode-related issues like oxidation of the ionomer binder at the anode can be mitigated by using KOH feed solutions. Therefore, AWE and AEM WE may get more similar in the future, and this review focuses on the developments in polymeric diaphragms, ion solvating membranes, and AEM.
22 July 2019 in Energy & Environmental Science
Energy efficient and cost efficient water electrolysis is essential for the large scale implementation of renewable energy. The two commercial low temperature electrolyzer technologies each suffer from serious drawbacks. The proton exchange membrane (PEM) electrolyzers remain expensive and depend strongly on the scarce metal iridium. The alkaline electrolyzers suffer from a large footprint due to low rate capability. Here we present an approach to make an alkaline electrolyzer perform like a PEM electrolyzer by means of an ion-solvating membrane. A long lasting effort to replace the state-of-the-art thick porous diaphragm by an anion exchange membrane has not proven successful. The ion-solvating membrane represents a third way. Demonstration cells based on KOH doped polybenzimidazole membranes and nickel based electrodes exhibited 1700 mA cm−2 at 1.8 V. This is far exceeding what has previously been achieved with membranes in alkaline environments without platinum group metal catalysts, and is comparable to state-of-the-art PEM electrolyzers.
24 June 2020 in Journal of Materials Chemistry A
Polybenzimidazoles represent a large family of high-performance polymers containing benzimidazole groups as part of the structural repeat unit. New application areas in electrochemical cells and separation processes have emerged during the last two decades, which has been a major driver for the tremendous development of new polybenzimidazole chemistries and materials in recent years. This comprehensive treatise is devoted to an investigation of the structural scope of polybenzimidazole derivatives, polybenzimidazole modifications and the acid–base behavior of the resulting materials. Advantages and limitations of different synthetic procedures and pathways are analyzed, with focus on homogeneous solution polymerization. The discussion extends to solution properties and the challenges that are faced in connection to molecular weight determination and processing. Methods for polybenzimidazole grafting or crosslinking, in particular by N-coupling, are reviewed and successful polymer blend strategies are identified. The amphoteric nature of benzimidazole groups further enriches the chemistry of polybenzimidazoles, as cationic or anionic ionenes are obtained depending on the pH. In the presence of protic acids, such as phosphoric acid, cationic ionenes in the form of protic polybenzimidazoliums are obtained, which dramatically changes the physicochemical properties of the material. Cationic ionenes are also derived by complete N-alkylation of a polybenzimidazole to the corresponding poly(dialkyl benzimidazolium), which has been intensively explored recently as a new direction in the field of anion exchange membranes. In the higher end of the pH scale in aqueous hydroxide solutions, anionic ionenes in the form of polybenzimidazolides are obtained as a result of deprotonation of the benzimidazole groups. The ionization of the polymer results in dramatically changed physicochemical properties as compared to the pristine material, which is described and discussed. From a technological point of view, performance and stability targets continue to motivate further research and development of new polybenzimidazole chemistries and energy materials. The overall aim of this review is therefore to identify challenges and opportunities in this area from synthetic chemistry and materials science perspectives to serve as a solid basis for further development prospects.
28 May 2008 in The Journal of Organic Chemistry
21 September 2020 in Electrochemical Energy Reviews
1 November 2020 in Applied Energy