19 October 2020 in Advanced Healthcare Materials
16 January 2020 in ACS Applied Materials & Interfaces
7 September 2022 in ACS Applied Materials & Interfaces
16 May 2023 in International Journal of Extreme Manufacturing
In order to mimic the natural heterogeneity of native tissue and provide a better microenvironment for cell culturing, multi-material bioprinting has become a common solution to construct tissue models in vitro. With the embedded printing method, complex 3D structure can be printed using soft biomaterials with reasonable shape fidelity. However, the current sequential multi-material embedded printing method faces a major challenge, which is the inevitable trade-off between the printed structural integrity and printing precision. Here, we propose a simultaneous multi-material embedded printing method. With this method, we can easily print firmly attached and high-precision multilayer structures. With multiple individually controlled nozzles, different biomaterials can be precisely deposited into a single crevasse, minimizing uncontrolled squeezing and guarantees no contamination of embedding medium within the structure. We analyse the dynamics of the extruded bioink in the embedding medium both analytically and experimentally, and quantitatively evaluate the effects of printing parameters including printing speed and rheology of embedding medium, on the 3D morphology of the printed filament. We demonstrate the printing of double-layer thin-walled structures, each layer less than 200 μm, as well as intestine and liver models with 5% gelatin methacryloyl that are crosslinked and extracted from the embedding medium without significant impairment or delamination. The peeling test further proves that the proposed method offers better structural integrity than conventional sequential printing methods. The proposed simultaneous multi-material embedded printing method can serve as a powerful tool to support the complex heterogeneous structure fabrication and open unique prospects for personalized medicine.
13 May 2020 in Bio-Design and Manufacturing
27 March 2021 in Journal of Bionic Engineering
The fabrication of multi-material medical phantoms with both patient-specificity and realistic mechanical properties is of great importance for the development of surgical planning and medical training. In this work, a 3D multi-material printing system for medical phantom manufacturing was developed. Rigid and elastomeric materials are firstly combined in such application for an accurate tactile feedback. The phantom is designed with multiple layers, where silicone ink, Thermoplastic Polyurethane (TPU), and Acrylonitrile Butadiene Styrene (ABS) were chosen as printing materials for skin, soft tissue, and bone, respectively. Then, the printed phantoms were utilized for the investigation of needle-phantom interaction by needle insertion experiments. The mechanical needle-phantom interaction was characterized by skin-soft tissue interfacial puncture force, puncture depth, and number of insertion force peaks. The experiments demonstrated that the manufacturing conditions, i.e. the silicone grease ratio, interfacial thickness and the infill rate, played effective roles in regulating mechanical needle-phantom interaction. Moreover, the influences of material properties, including interfacial thickness and ultimate stress, on needle-phantom interaction were studied by finite element simulation. Also, a patient-specific forearm phantom was printed, where the anatomical features were acquired from Computed Tomography (CT) data. This study provided a potential manufacturing method for multi-material medical phantoms with tunable mechanical properties and offered guidelines for better phantom design.