1 August 2006 in Polymer Science, Series A
Composites based on a segmented polyurethane and polysaccharides (starch, dextrin, and chitosan) have been prepared, and their biodegradation ability has been studied. With the use of pyrolysis mass-s
29 March 2024 in Journal of Molecular Structure
5 February 2021 in Journal of Applied Polymer Science
9 March 2021 in Polymer journal
The results of pyrolytic mass spectrometry studies of biodegradable polymeric materials based on polyolefins and segmented polyurethanes with various functional additives are summarized. The structure and composition of initial and after exposure in soil, climate chamber and after exposure to microorganisms (bacteria, yeast) composites are characterized. In the research presented, influence of acetates and complexonates of metals, including cobalt, copper and zinc, on the structural changes in the high pressure polyethylene (HPPE) occurring under the impact of factors such as temperature, humidity and UV-radiation is investigated. It was established, that samples of HPPE, modified by cobalt acetate and cobalt and copper complexonates are responsive and most sensitive to the action of above-mentioned physical factors. Investigation of a segmented polyurethanes (SPU) of a different chemical structure influenced by a factors, modeling of the environmental conditions was conducted. It was shown using pyrolytic mass-spectrometry method and monitoring of samples’ weight loss that under the influence of above-mentioned environmental factors in the SPU occurs processes, resulting to changing its micro heterogeneous structure. It is established that SPU having ester links in its structure and being exposured in soil for 120 days is predominantly attacked by microorganisms, then the main active factor appears to be soil’ pH value – after 300 days in soil with alkaline or acid solution SPU sample decomposes into a separate fragments. Features of the chemical structure of urethane polymers synthesized on the base of hydroxylated rapeseed oil (polyol) were examined. Analysis of the results showed that the macromolecular compounds obtained are segmented polyurethanes which thermal degradation occurs in two stages: hard blocks are destroyed at the first stage, while polyol part (soft blocks) decomposes at the second stage, allowing to identify the temperature area of polymer destruction and thus its temperature region of operation. It is shown that the most suitable from the viewpoint of environmental friendly is polyurethane composition containing more than 50% of polyol. Thermal mass-spectrometry (TMS) has been employed to investigate processes of thermal destruction of segmented polyurethane and it’s compositions filled by polysaccharides: starch, dextrin, chitosan. The features of thermal destruction for segmented polyurethane and related compositions before and after their storage in a soil have been determined. Application TMS is shown to permit the processes of biodegradation of polymeric materials to investigate.
2 September 2020 in Polymer journal
7 August 2024 in Polymer journal
A polyelectrolyte complex (PEC) of pectin (polyanion) and polyethyleneimine (polycation) at an equimolar ratio of carboxylic to amino groups was synthesized. Based on it, polyelectrolyte-metal complexes (PEMC) were prepared by adsorption of copper and silver ions from 0.1 M aqueous solutions of CuSO4 and AgNO3 salts. The starting materials (pectin, polyethyleneimine), polyelectrolyte complexes, and polyelectrolyte-metal complexes with Cu2+ and Ag+ were characterized by pyrolysis mass spectrometry (PMS). The PMS results (total ionic current, amount of volatile products, their specific intensity) indicate significant differences in the behavior of the studied objects during pyrolysis and confirm the formation of a polyelectrolyte complex between pectin and polyethyleneimine. It was found that PEC is thermally less stable than the starting materials (pectin and PEI), probably due to electrostatic interaction and corresponding redistribution of electron density between atoms in the macromolecules of pectin and PEI due to complexation. Differences in the thermal behavior of copper- and silver-containing PEMC are caused by complexation processes in these compounds and the different chemical structures of the obtained samples. The kinetics of the total ionic current during the pyrolysis of pectin-PEI complexes with Cu2+ at a temperature of 170 °С and with Ag+ at a temperature of 150 °С was studied and it was found that PEMC are thermostable for 30 min at the given temperature. Such PMS results provide evidence for the possibility of forming copper- and silver-containing nanocomposites by thermochemical reduction of Cu2+ or Ag+ ions in the studied polyelectrolyte-metal complexes based on PEC pectin-polyethyleneimine. The previously proposed mechanism of thermochemical reduction of Cu2+ and Ag+ ions during the synthesis of the corresponding nanocomposites was confirmed.