2 July 2025 in Nature Communications
Atomic clocks are at the leading edge of accuracy and precision and are essential for synchronisation of distributed critical infrastructure, position, navigation and timing, and scientific applications. There has been significant improvements in the performance of atomic clocks with the shift from microwave to optical frequency transitions. However, this performance increase has come at the cost of size, complexity and fragility, which has confined optical clocks to laboratories. Here we report on a recent international collaboration where three emerging optical clocks, each based on different operating principles, were trialled at sea. These clocks demonstrated world-class performance and reliability by providing stable frequency outputs in optical, microwave and radio-frequency domains over three weeks of unsupervised naval operation.
12 October 2018 in Physical Review Applied
We develop and characterize an atom-guiding technique that loads cold rubidium atoms into a hollow-core optical fiber, an order-of-magnitude greater than previously reported results. This result is possible because it is guided by a physically realistic simulation that can provide the specifications for a loading efficiency of 3.0% and a peak optical depth of 600. The simulation further shows that the loading efficiency is limited solely by the geometric overlap of the atom cloud and the optical guide beam, and is thus open to further improvement with experimental modification. The experimental arrangement allows observation of the real-time effects of light-assisted cold-atom collisions and background-gas collisions by tracking the dynamics of the cold-atom cloud as it falls into the fiber. The combination of these observations, and physical understanding from the simulation, allows estimation of the limits to loading cold atoms into hollow-core fibers.
2 January 2017 in IEEE Transactions on Instrumentation and Measurement
We report on a robust distributed Bragg reflector (DBR) laser system for an atomic fountain clock. To confirm the performance of a DBR laser, the short-term stability of an atomic fountain clock, KRISS-F1, is measured with both DBR laser and an extended-cavity diode laser (ECDL) as a master laser in the fountain laser system. The short-term stability of the fountain clock due to the laser noise is determined to be σ y (τ = T c ) = 1.4×10 -14 when either the ECDL or the DBR laser is used as a master laser. The total stability of the fountain clock with the DBR laser is limited to 3.5 × 10 -14 at 1 s of averaging time and at the highest atom number in the experiment, which is limited by quantum projection noise. No additional degradation in fountain performance is observed when an ECDL is replaced by the DBR laser. From these results, we conclude that our fountain clock is made much more robust by adopting a DBR laser, which is immune to acoustic and vibrational shocks as well as environmental temperature variations.
26 February 2019 in Physical Review Applied
We present an optical approach to compensating for spatially varying ac-Stark shifts that appear on atomic ensembles subject to strong optical control or trapping fields. The introduction of an additional weak light field produces an intentional perturbation between atomic states that is tuned to suppress the influence of the strong field. The compensation field suppresses sensitivity in one of the transition frequencies of the trapped atoms to both the atomic distribution and motion. We demonstrate this technique in a cold rubidium ensemble and show a reduction in inhomogeneous broadening in the trap. This two-color approach emulates the magic-trapping approach that is used in modern atomic-lattice clocks but provides greater flexibility in choice of atomic species, probe transition, and trap wavelength.
16 December 2019 in Optics Letters
Self-heterodyne fiber interferometers have been shown to be capable of stabilizing lasers to ultra-narrow linewidths and present an excellent alternative to high-finesse cavities for frequency stabilization. In addition to suppressing frequency noise, these devices are highly tunable and can be manipulated to produce high-speed frequency sweeps over the entire range of the laser. We present an analytic approach for choosing a delay-line length for both optimal noise suppression and highest in-loop frequency sweep rate. Based on this model, we stabilize an extended cavity diode laser to a fiber Michelson interferometer and demonstrate a linewidth of 700 Hz over millisecond timescales while also allowing for a frequency scan rate of 1 THz/s. We independently measure the maximum deviation from linearity of the sweep to be only 100 kHz.
4 April 2017 in IEEE Microwave and Wireless Components Letters
In this letter, the design of a low phase noise frequency synthesizer is presented. The synthesizer was designed to produce four frequencies: 10 MHz, 100 MHz, 1 GHz and 10 GHz. The 1-GHz signal is produced by frequency division whereas the 100-MHz output is generated by phase-locking a low phase noise oscillator to the 1-GHz signal, hence significantly reducing its phase noise. Both residual and total phase noise measurements are presented.