1 March 2021 in Superlattices and Microstructures
17 June 2024 in Journal of Rare Earths
11 April 2023 in IEEE Transactions on Electron Devices
This article presents an analytical model for a thin silicon-on-insulator (SOI) device based on the enhancement of silicon critical breakdown field technology. Solving the 2-D Poisson equation in the thin drift region reasonably explains the physical mechanism that the thin silicon layer enhances the critical breakdown field of silicon material. Meanwhile, a new ultrathin SOI lateral double diffused metal oxide semiconductor field effect transistor with electron accumulation layer is proposed, named EA SOI LDMOS, to verify the proposed model and improve the tradeoff between breakdown voltage (BV) and specific ON-resistance ( ${R}_{\text {on,sp}}{)}$ . The electron accumulation provides a new conduction path under the gate oxide layer, resulting in a lower resistance compared with conventional thin SOI LDMOS. The various thickness of the thin silicon layer enhances the critical breakdown field of silicon, which increases the BV of EA SOI LDMOS. The results show that the ${R}_{\text {on,sp}}$ of EA SOI LDMOS is decreased from 303 $\text{m}\Omega \cdot $ cm2 of the conventional ultrathin SOI LDMOS to 207 $\text{m}\Omega \cdot $ cm2, which is 32% lower with the same BV. The analytical results of the electrical characteristics are in good agreement with the results from numerical simulations.
5 May 2022 in IEEE Access
In insulation system of power equipment, electrical tree grown under the effect of partial discharges (PD) is one of the main degradation processes leading to failure of high voltage polymeric insulation. PD signals are measured and analyzed for condition monitoring of electrical insulation. In this paper, the combine detection system of Ultra-High Frequency (UHF) PD and electrical tree was used to test PE samples. Based on the energy amplitude variation, the average energy and the average energy distribution of PD signals to identify the growth process of electrical tree, twenty-eight PD characteristic parameters were used as input parameters, such as the energy percentage of 16-layer wavelet decomposition, the wavelet coefficient parameter and the time-frequency domain parameter, which entered the three-layer Back Propagation Neural Network (BPNN) of forty-five hidden neurons, and then the accuracy of pattern recognition during the growth process of electrical tree can reach 99.93% after 5000 steps of training cycle. The consistency of calculation results and experimental results presents that the calculation method can reveal the relationship between PD signals and the growth of electrical tree, which lays the foundation for the process analysis of electrical tree and insulation state monitoring.
18 August 2021 in IEEE Transactions on Electron Devices
A new vertical double-diffused metal oxide semiconductor field effect transistor (MOSFET) is presented based on the high- ${k}$ (Hk) MOSFET concept in this article with the step high- ${k}$ insulator, named as step Hk vertical double-diffused metal oxide semiconductor (VDMOS), to improve the electric field modulation effect. For step Hk VDMOS, the depletion is increased by the electric field modulation effect of step Hk insulator, which decreases the specific on-resistance of step Hk VDMOS compared to the conventional Hk VDMOS. The various thickness of the Hk insulator modulates the vertical electric field distribution in the drift region, which increases the breakdown voltage (BV) of the step Hk VDMOS. Meanwhile, an analytical model for novel step Hk VDMOS is obtained by solving the 2-D Poisson equation in an N-type drift region, and the 2-D Laplace equation in the step Hk region, which can reasonably explain the modulation effect of the step Hk region on the electric field distribution. The results show that the BV of the step Hk VDMOS is increased from 639 V of the conventional Hk VDMOS to 736 V with the same drift length of $42~\mu \text{m}$ . The theoretical results of the electrical characteristics are in good agreement with the results from numerical simulations.
4 March 2024 in Physica Scripta
A new I−4 space group silicon allotrope is proposed in this paper. The electronics properties, mechanical properties and Ag(100)/I4Si(100) interface properties are studied using first principle calculations method. The results of the phonon show that I−4 Si is dynamically stable. Elastic constants reveal I−4 Si is dynamical stable. Electronics properties calculations reveal that the CBM and VBM of I−4 Si are at X and M point, which indicates that I−4 Si is an indirect band gap semiconductor with a high band gap of 1.95 eV. To satisfy the demands for fabricating electronic devices, the N-type doping, P-type doping and Ohmic contact are studied, too. The fermi energy level of N-type and P-type I−4 Si move into conduction band and valence band, respectively. The Schottky barrier of Ag/I-4 interface is 0.65 eV. Meanwhile, the current-voltage curve becomes highly symmetric, suggesting an Ohmic behavior of the Ag(100)/I4Si(100) interface. Critical breakdown field calculations results show that the critical breakdown field of I−4 Si is 9.05 × 105 V cm−1, which is 3.02 times that of the diamond Si. Because band gap and critical breakdown field of I-4 Si are much greater than that of diamond Si, I-4 Si is potential electronic semiconductor material. Thus, I−4 Si can be applied in the field of modern power electronic device applications due to its superior electronic properties.