An attempt was made to enhance the productivity of the still by spreading heat storage material in the basin or by focusing additional solar radiation into the still with the help of external reflector. For the purpose of conducting the study, three solar stills with identical dimensions were fabricated. They were – conventional still, still with heat storage materials and still with external reflector. The objective of the study was to investigate the efficiency of heat storage material and external reflector in improving the performance of single basin double slope solar still. The main focus was to study the rate of change of temperature parameter values and production values during the increasing and decreasing sunshine hours. In the still with reflector, the rate of increase of water temperature and distillate production was high during the increasing sunshine hours. But the still with heat storage materials sustained higher water temperature rate and production rate during declining sunshine hours. The productivity of the still with heat storage material was 23.08% higher than the conventional still. But the productivity rise in the still with reflector was 62.97%.
7 July 2017 in International Journal of Ambient Energy
The major task before us is to increase the performance of solar stills. Researchers have done many modifications to enhance the productivity of solar stills. In this article, the authors have attempted to improve the performance of solar stills. Instead of a conventional solar still, a double-slope single-basin solar still was fabricated. It was internally modified by spreading pebbles at the bottom. External modification was attempted by fitting an external mirror. Internal modification enhanced the production marginally. Significant improvement in production was witnessed when both internal and external modifications were attempted. The performance of the double-slope single-basin solar still with internal and external modifications was 40.86% higher than that of the solar still without any modification.
31 August 2021 in Environmental Science and Pollution Research
Solar stills are widely used to produce potable water in arid and semi-arid regions. Modifications in the conventional solar stills – internal or external or both – were attempted by the researchers to enhance the productivity. In this study, an attempt was taken to incorporate four internal modifications (parameters) in single basin and stepped basin solar stills to maximize the production. The four parameters (modifications) selected for the study were – basin liner design, heat storage material, wick material, and basin water depth. The objective of the study was to identify the combination of parameters levels that maximize the distillate production in single basin and stepped basin solar stills by applying Taguchi technique. The selected four parameters and their best three levels were combined as per L9 orthogonal array and from the experimental result, the S/N ratio for each parameter level was calculated. The parameter levels corresponding to the maximum S/N ratio were selected and incorporated in the stills to redesign the single basin and stepped basin still in accordance with Robust design. The single basin and stepped basin solar stills designed as per Taguchi technique produced 175.2% and 132.2%, respectively, higher distillate production than the conventional single basin and stepped basin stills.
Concentric tube heat exchangers are used for multitude of applications ranging from heat transfer for low end applications to coolants in space vehicles. Typical heat exchange equations are sufficient to solve problems related to finite temperature difference. However, scientific solutions require complex calculations that considers losses and minute hast dissipations to give accurate results. Mathematical and analytical methods of counter flow heat exchanger is carried out in this study. Enumeration of heat exchange during counter flow is facilitated by incorporating Runge-Kutta Method. Comparison between the two analysis methods is carried out for two conditions making use of NTU approach. During one of the conditions the input values were maintained as same, during the second conditions, the input values were varied. The Runge-Kutta Method gave accurate results for both the conditions.