3 August 2024 in Interactions
1 January 2024 in AIP Advances
Manufacturing has grown challenging because of the increased usage of harder materials, such as titanium alloys, in many industries, such as aerospace, automobiles, and marine. Conventional material removal procedures are not suitable for these tough materials due to their increased hardness and slow machinability. Wire Electrical discharge machining (WEDM) is a modern approach for material removal, particularly for harder materials, such as titanium alloys, nickel alloys, hard particle reinforced metal matrix composites, etc. The research design was performed by deeming the independent factors, such as duration of pulse and applied current. The removal rate of material, surface roughness of the machined region, dimensional deviation, and tolerance errors in form/orientation are considered performance metrics. Taguchi’s approach was engaged to assess the process variables, and the importance of the process factors was established using analysis of variance approach. The purpose of this research is to create an AI based decision making tool, which can be utilized to anticipate the various parameters that impact the WEDM material removal process. The discoveries of the present exploration allowing the manufacturers to make better-informed decisions with a developed model’s capability by demonstrating that the model’s predicted values were in close confirmation to the actual values.
1 April 2024 in AIP Advances
Electric Discharge Machining (EDM) is essential for shaping and cutting tool steel. EDM’s precision in machining difficult materials and tool steel characteristics are well known. EDM efficiency requires reliable performance measurement parameters. The physical shape and mobility of the electrode tool are critical in EDM research. Layer machining is an advanced method that removes material in a sequential manner to produce intricate 3D shapes in tool steel and several other materials. The improvement in layer machining methods with precise toolpath algorithms, adaptive layer thickness management, and real-time monitoring systems is required to maximize precision and efficiency. Response surface methodology, the artificial neural network, and other techniques are necessary to optimize EDM operations and maximize performance. Many researchers experimented with electrode shapes and movement patterns to enhance the removal of material and the quality of surfaces. Investigation of complex electrode structures and innovative tool path strategies has been performed in previous studies. It was very difficult to consider various factors during the EDM operation; hence, the present review summarizes the positive outcomes of previous research. The review emphasizes optimizing pulse duration and discharge current to improve EDM efficiency. The present comprehensive review discusses research on EDM in three main areas: electrode tool geometry and motion, tool steel layer processing, and factors for measuring EDM performance. The objective of the present review is to focus on measuring material removal rates, surface roughness, tool wear, and energy usage. The present review concludes that EDM is crucial to machining tool steel and cutting tool materials. Integrating and hybrid machining technologies can improve performance, and improved optimization techniques are crucial. It also recognizes knowledge gaps and explores new frontiers in this dynamic field.
1 January 2024 in AIP Advances
This work is an attempt to predict tool wear for turning EN24 material by the hybrid Taguchi-ANN (Taguchi-Artificial Neural Network) method. The objective is to minimize the tool wear. The independent factors are cutting environment, feed rate, depth of cut, nose radius, and tool type. A Spinner numerical control lathe is used to assess performance. As per the Taguchi orthogonal array, 27 experiments are conducted for each value of the uncontrollable factor (spindle vibration). Optimal setting is structured by Taguchi analysis and the response table. The additive model is used to predict the response. Conformity test is carried out to check whether the predicted and experimental values of response are within the range given by the confidence interval. Furthermore, the ANN is used to predict and analyze the tool wear. The result showed that the supremely important parameter is depth of cut and the least important parameter is tool type. The ideal set found is A3, B3, C3, D1, and E3. Through ANN analysis, it is observed that the experimental values are very close to the predicted values of tool wear. The predicted value at optimal setting is 0.0401 mm. The experimental values at optimal setting is 0.0422 mm. In addition, the study showed that when the feed rate and nose radius are both set to high levels and the depth of cut is medium, using an uncoated tungsten carbide tool with minimal lubrication results in the least amount of tool wear.