17 January 2019 in GetMobile: Mobile Computing and Communications
Information about the objects a person touches is an essential input to many applications in ubiquitous computing. The ability to sense touch in the physical world can form the basis of the tangible user interface [1], which allows humans to use omnipresent objects as a command-and-control interface to the digital world. On the other hand, the sequence of objects used can enable inference of human activities. Post-processing of this information can support many activity-aware applications, such as stroke rehabilitation assessment in homes, consumer analytics for retail stores, etc.
25 December 2024 in IEEE Sensors Journal
In compact power electronic devices, magnetic-ring-free current sensors are increasingly preferred due to their compact size and lightweight nature. However, in high-precision small current measurements, the geomagnetic field can introduce substantial errors. To address this issue, a sensor chip using a bridge structure composed of four highly sensitive tunnel magnetoresistance (TMR) elements was employed, and a novel magnetic-ring-free current sensor was designed that eliminates geomagnetic field interference, thereby achieving precise small current measurements. This sensor operates in a zero-magnetic-flux state for the geomagnetic field, where the geomagnetic signal is fed back through a feedback coil, effectively canceling the geomagnetic field with the magnetic field generated in the feedback coil. This design enables the current sensor to achieve high-precision measurements. Experimental results showed that the current sensor achieved a sensitivity of 3.808 V/A and a measurement accuracy of ±1.854% within a sensing range of ±1.8 A. These findings offer a novel design strategy for future current sensors.
25 December 2023 in Applied Physics Letters
We have explored an approach to constructing reliable magnetic field sensors based on cobalt-based Schottky contacts, which has the potential to find practical applications when an applied magnetic field modifies the current–voltage (I–V) characteristics of heterostructures. For this aim, heterostructures based on a ferromagnetic film Co were deposited on a Si(100) substrate by means of an ultrathin Pt film. The electrical properties of Co/Pt/Si heterojunctions were investigated using temperature-dependent I–V characteristics. The magnetic transport properties of Co/Pt/Si heterojunctions have been investigated, and the results show that the experimental ratio of current, I(B)/I(0), measured in magnetic field B and zero field, is linearly related to magnetic field B and almost independent of the applied voltage. Detailed measurements of the sensitivity and linearity of a heterojunction-based self-referencing magnetic field sensor were performed. The results show that the linearity and sensitivity of the sensor increase with an increase in the applied voltage frequency, and the sensitivity of the sensor reaches up to 72.09 μA/T at a voltage frequency of 2000 Hz. The sensor is easy to integrate with existing semiconductor processes, has a simple structure, and can be used for geological applications such as energy exploration.