Bo Liu

Bo Liu

Auto-generated profile, based on publicly available information

Bo Liu

Advanced Research Center for Nanolithography (ARCNL), Science Park 106, Amsterdam 1098 XG, Netherlands

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 February 2022 in Physical Review Research
Verified
Journal Article
Open access
PDF file
JHJavier Hernandez-Rueda
Javier Hernandez-Rueda
BLBo Liu
Bo Liu
DHDiko J. Hemminga
Diko J. Hemminga
YMYahia Mostafa
Yahia Mostafa
RMRandy A. Meijer
Randy A. Meijer
OVOscar O. Versolato
Oscar O. Versolato
We experimentally and numerically investigate the early-time hydrodynamic response of tin microdroplets driven by a ns-laser-induced plasma. Experimentally, we use stroboscopic microscopy to record the laser-induced dynamics of liquid tin droplets and determine the propulsion speed (U) and initial radial expansion rate (Ṙ0). The ratio of these two quantities is a key parameter to be optimized for applications in nanolithography, where laser-impacted tin droplets serve as targets for generating extreme ultraviolet light. We explore a large parameter space to investigate the influence of the tin droplet diameter, laser beam diameter, and laser energy on the Ṙ0/U ratio. We find good agreement when comparing the experimentally obtained U and Ṙ0 values to those obtained by detailed radiation-hydrodynamic simulations using RALEF-2D. From the validated simulations, we extract the spatial distribution of the plasma-driven pressure impulse at the droplet-plasma interface to quantify its influence on the partitioning of kinetic energy channeled into propulsion or deformation. Our findings demonstrate that the width of the pressure impulse is the sole pertinent parameter for extracting the kinetic energy partitioning, which ultimately determines the late-time target morphology. We find good agreement between our full radiation-hydrodynamic modeling and a generalized analytical fluid-dynamics model [H. Gelderblom et al., J. Fluid Mech. 794, 676 (2016)]. These findings can be used to optimize the kinetic energy partition and tailor the features of tin targets for nanolithography.

13 February 2020 in Physical Review Applied
Verified
Journal Article
Open access
PDF file
BLBo Liu
Bo Liu
DKDmitry Kurilovich
Dmitry Kurilovich
HGHanneke Gelderblom
Hanneke Gelderblom
OVOscar O. Versolato
Oscar O. Versolato
We experimentally study the morphology of a radially expanding sheet of liquid tin, formed by nanosecond-pulse Nd:YAG laser impact on a spherical microdroplet. Specifically, the sheet thickness profile and its time evolution are captured in detail over a range of laser-pulse energies and for two droplet sizes. Two complementary methods to determine this thickness are employed and shown to be in excellent agreement. All obtained thickness profiles collapse onto a single self-similar curve. Spatial integration of the thickness profiles allows us to determine the volume of the sheet. Remarkably, less than half of the initial amount of tin remains in the sheet under conditions relevant for industrial sources of extreme ultraviolet light, where these thin tin sheets serve as target material. Further analysis shows that the dominant fraction of the mass lost from the sheet during its expansion ends up as fine fragments. We propose that such mass loss can be minimized by producing the sheet targets on the shortest possible time scale. These findings may be particularly valuable for ongoing developments in state-of-the-art nanolithography.

2 February 2021 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
BLBo Liu
Bo Liu
RMRandy A. Meijer
Randy A. Meijer
JHJavier Hernandez-Rueda
Javier Hernandez-Rueda
DKDmitry Kurilovich
Dmitry Kurilovich
ZMZeudi Mazzotta
Zeudi Mazzotta
OVOscar O. Versolato
Oscar O. Versolato
We experimentally study the mass distribution of a sheet of liquid tin formed by the impact of a ns-laser pulse on a spherical microdroplet. The mass distribution is obtained using a low-intensity, second ns-laser pulse, which induces vaporization of the stretching thin tin sheet. This careful vaporization enables the investigation of the thickness profile of the sheet, and its mass, at early times after laser pulse impact on a droplet, which have remained inaccessible by the methods used in recent work [B. Liu et al., Phys. Rev. Appl. 13, 024035 (2020)]. The vaporization method, moreover, allows the visualization of the thick rim that bounds the thin sheet. Our results unambiguously demonstrate that increasing the energy of the ns-laser pulse incident on the droplet, which enables reaching a predetermined target radius more quickly, results in a larger mass fraction remaining in the sheet. Specifically, our studies show a doubling of the sheet mass fraction by reducing the required expansion time. As a corollary, less tin will end up in other channels of the mass distribution, such as fragments surrounding the sheet. Accordingly, more mass would be available in the target sheet for interaction with the more energetic, main laser pulse that is used in the industry to produce a hot and dense plasma from tin sheet targets in order to create extreme ultraviolet light for nanolithography.

29 August 2022 in Physical Review Fluids
Verified
Journal Article
Open access
PDF file
BLBo Liu
Bo Liu
JHJavier Hernandez-Rueda
Javier Hernandez-Rueda
HGHanneke Gelderblom
Hanneke Gelderblom
OVOscar O. Versolato
Oscar O. Versolato
We experimentally investigate the speed of fragments produced by ligament breakup in the laser-induced deformation of tin microdroplets into axisymmetric sheets. The experiments were carried out covering a wide range of droplet diameters and laser-pulse energies. In addition to fragments produced by end-pinching, we also observe fragments shed via Rayleigh-Plateau breakup of long ligaments at late times. A double-frame backlit camera was used to obtain the speeds of the fragments uf and the time of their detachment td. We show that by normalizing uf to the initial expansion speed of the sheet Ṙ0, all data collapse onto a single, universal curve that is a function of the dimensionless time td/τc only, where τc is the capillary time. This universal curve is explicitly independent of the droplet's Weber number. The collapse of uf is supported by energy conservation arguments. Our findings enable the prediction of the instantaneous speed and position of the fragments shed from liquid tin targets used in state-of-the-art extreme ultraviolet nanolithography, facilitating the design of effective mitigation strategies against microparticulate debris.

10 June 2022 in Applied Physics A
Verified
Journal Article
Open access
PDF file
RMR. A. Meijer
R. A. Meijer
DKD. Kurilovich
D. Kurilovich
BLB. Liu
B. Liu
ZMZ. Mazzotta
Z. Mazzotta
JHJ. Hernandez-Rueda
J. Hernandez-Rueda
SWS. Witte
S. Witte
The laser ablation threshold is an important parameter that governs the response of materials to intense laser irradiation. Here we study the ablation threshold of liquid tin, by irradiating tin microdroplets with nanosecond laser pulses having finely controlled temporal shape and duration. We use the time-dependent reflection from the droplet as the main observable, which exhibits a sharp decrease in magnitude at a given time instance that depends on the laser intensity. This moment marks the generation of a plasma that strongly absorbs the following incident laser light, rapidly expands, and thereby sets in motion the remainder of the liquid droplet. We find an inverse-square dependence of this plasma-onset time on laser intensity and attribute this scaling to the presence of one-dimensional heat diffusion during irradiation. This scaling and its one-dimensional thermal origin is strongly established in literature and follows from a square-root scaling of the thermal diffusion depth with time. Our experiment unambiguously shows that this scaling law holds for our specific case of nanosecond laser impact on tin microdroplets. The results presented in this work are of particular interest to target preparation and metrology in extreme-ultraviolet sources utilizing tin microdroplet targets.

21 July 2023 in Physical Review Applied
Verified
Journal Article
Open access
PDF file
BLBo Liu
Bo Liu
RMRandy A. Meijer
Randy A. Meijer
WLWei Li
Wei Li
JHJavier Hernandez-Rueda
Javier Hernandez-Rueda
HGHanneke Gelderblom
Hanneke Gelderblom
OVOscar O. Versolato
Oscar O. Versolato
We experimentally study the mass partitioning of a fragmenting liquid sheet formed after the impact of a ns-laser pulse on a tin microdroplet, and its dependence on laser pulse energy and droplet size. We present the temporal evolution of individual liquid fractions: the sheet and its bounding rim, ligaments protruding from the rim, and droplets shed by the ligaments, applying machine learning to analyze subresolution fragments. Our results show that the temporal evolution of the mass partitioning between the sheet, rim, ligaments, and fragments is independent of the deformation Weber number—following Wang and Bourouiba [J. Fluid Mech. 935, A29 (2022)] for the analogous droplet-pillar impact case, extending the work to larger Weber numbers and to a system where the timescale of deformation is fully decoupled from impact. The full mass partitioning is accounted for by quantifying the further contributions unique to the laser-droplet impact case: that of a centrally located mass remnant, and the mass ablated by the laser pulse. These findings can be employed to optimize the mass utilization of the liquid tin that is used as target material in the production of extreme ultraviolet light for nanolithography.