9 July 2024 in Nuclear Engineering and Technology
1 February 2017 in Optical Engineering
We present an arc flash sensor that can trace the arc event position as well as intensity by utilizing conventional plastic optical fibers (POFs). In order to check the possibility as a light-receiving sensor, we experimentally confirm that the externally irradiated flash light can be coupled into the fiber core through the surface of POF without any additional treatment. After the incident light is divided in two optical paths toward opposite directions, they have the different attenuation values determined by the propagation distance. Since the optical transmission loss of a POF is constant regardless of the irradiated energy, the intensity ratio for two signals measured at both fiber ends is given as a function of position. The experimental results show that we can successfully trace the event position from this intensity ratio. In addition, it is possible to define the illuminated energy by comparing the absolute value of the intensity measured from one side. According to the experimental results, the proposed sensor has a relatively fine spatial resolution, , despite having a simple structure.
27 November 2025 in Journal of Lightwave Technology
We investigated the effect of externally introduced 980 nm photobleaching on radiation-induced attenuation (RIA) in pure silica core (PSC) single-mode fibers and demonstrated that it enhanced the radiation-hard characteristics of PSC fiber based Raman-distributed temperature sensors (Raman-DTS) operating at 1550 nm. Gamma-ray irradiation experiments confirmed that 980 nm photobleaching effectively reduces the RIA of PSC fibers at 1550 nm. RIA spectra were measured in the wavelength range of 1400–1650 nm during gamma-ray irradiation to evaluate the influence of 980 nm photo-bleaching on the wavelength dependence of RIA. We also analyzed the spectral changes in RIA of the PSC fibers with different photobleaching power and showed that the wavelength dependence of RIA can be tuned by adjusting the bleaching power. Finally, we demonstrated that applying the external photo-bleaching strategy effectively mitigates radiation-induced temperature measurement distortion in Raman-DTS by reducing the RIA imbalance between the Raman Stokes and anti-Stokes scattering bands.
1 January 2026 in Journal of Lightwave Technology
2 November 2026 in Optics Express
This study evaluated hydroxyl (OH)-containing, fluorine (F)-doped silica optical fibers developed to enhance radiation resistance for use in high-radiation environments. Fibers with different F and OH concentrations were fabricated using the vapor-phase axial deposition (VAD) process and compared with commercial radiation-hardened fibers under gamma-ray irradiation. The fabricated fibers exhibited superior radiation resistance, with an RIA of 3.7–6.5 dB/km at 100 kGy and 1550 nm, and a pronounced pre-irradiation effect that reduced the RIA at the same dose by up to 78% compared with the first irradiation cycle. These results suggest that the combined F and OH composition is an important factor influencing the radiation resistance and long-term performance of silica optical fibers intended for high-radiation environments.