26 October 2020 in Applied Physics Letters
Although ultrafast lasers provide unique capabilities for advanced manufacturing, important challenges remain since super-resolution naturally conflicts with high repeatability in material processing. In this work, we perform statistical analyses of ablation precision at varying pulse durations, down to the sub-picosecond regime. By comparing the results with a “noise model” accounting for laser fluctuations, we establish that pulses shorter than 200 fs allow us to obtain the highest achievable level of determinism. Our model is a simple extension of an extensively used method proposed by Liu in which error propagation theory is applied to allow us to derive and reach the limits of precision and reproducibility in laser machining. Its validity is confirmed by an experimental demonstration in which reproducible features as small as 1/10 of the beam size are produced with a stable laser source exhibiting energy fluctuations of 0.3%.
5 November 2020 in Optical Engineering
<!-- *** Custom HTML *** --> We study laser-induced contamination (LIC) as a potential cause of optical losses and laser-induced damage of optical components for ultrashort pulse lasers with high average power in the MHz regime. Our work is conducted on dichroic mirrors designed for maximum reflection at 515 nm operated in ambient air. Based on the development of an experimental set-up for real-time monitoring of LIC and accelerated test protocols, we have conducted a parametric study on LIC development and studied its growth dynamics and morphology. We show that LIC is a main limitation of short-wavelength, high average power fs/ps lasers, with the formation of nanometric highly absorbing layers of carbonate compounds on the laser footprint, with evidence of thermal effects. It is also found that the last layer of the stack, at the interface between air and coating stack, is critical in the LIC growth which can open some perspectives for limitation of this effect.
11 September 2018 in Optical Engineering
A vacuum chamber was designed to study the risk of laser-induced contamination (LIC) on optical payloads integrated on spaceflight missions. In this context, tests were performed with a nanosecond pulsed laser at 355 nm on fused silica substrates under toluene exposure with multiple laser irradiation. Specific experimental procedures are described in order to obtain repeatable results. Finally, series of tests were performed to investigate the onset of the LIC deposition process and its evolution over time. A slight antireflective effect is consistently observed at the onset of the deposition process. We suggest that this is an indication that the LIC deposition process in our experimental conditions starts with a nucleation layer consisting of small dense islands of deposit.
1 September 2022 in Optical Engineering
Lasers in space often suffer from light absorbing deposits forming inside the resonator. This effect is commonly called laser-induced contamination (LIC), and its mechanism can be compared with laser chemical vapor deposition. LIC experiments were carried out in a dedicated vacuum chamber using a q-switched 355-nm laser, hafnia- or silica-coated fused silica samples and contamination by epoxy adhesive outgassing, or toluene vapor in vacuum. The typical deposit formation was observed at different experimental conditions and analyzed by in situ laser-induced fluorescence imaging and ex situ white light interference microscopy. We determined the average growth rate during the first growth stage (bump-shaped growth) and analyzed it as a function of the laser fluence, sample nature, and used contamination. The data show that the band gap of the sample is important for the LIC process in the first growth stage. The light absorbed in the sample leads to a temperature rise that drives the deposit growth. This knowledge opens a new pathway to minimize LIC that is complementary to studies that aim to reduce the adsorption of contaminant molecules by making chemical surface treatments.