1 December 2020 in APL Photonics
For speckle pattern-based wavemeters or spectrometers, the intermodal and the chromatic dispersion of the diffusion waveguide are key factors in determining the wavelength resolution. In this study, we propose a new mechanism to modulate the fiber speckles aside from the dispersion related effect. The polarization modulation is introduced in a rectangular core fiber (RCF) by using an in-line polarization rotator (IPR). The IPR can rotate the polarization angle at different wavelengths. Interestingly, it is observed that the modulated speckle patterns appear periodically similar, and they present more variations when compared to unmodulated ones. The theoretical simulation indicates that the polarization exerts an influence on the fiber speckles by modulating the mode coupling coefficients when light is coupled into the RCF. In the demonstration experiment, we first built a precise laser frequency tuning system based on an electro-optic modulator and a microwave source. By comparing the recorded speckles with and without polarization modulation, the former speckles have lower correlations, which are evaluated using the Arc Cosine Similarity algorithm. Reconstructing the spectrum of speckles, the smallest detectable wavelength that can be detected with polarization modulation is 0.2 fm. The experimental results prove that the polarization modulation is a convenient and effective method to enhance the speckle’s wavelength sensitivity. In addition, this study paves a new way to design high-resolution wavemeters with shorter, more compact optical waveguides.
11 November 2021 in Optics Letters
Fiber Bragg gratings (FBGs) have been widely employed as a sensor for temperature, vibration, strain, etc. measurements. However, extant methods for FBG interrogation still face challenges in the aspects of sensitivity, measurement speed, and cost. In this Letter, we introduced random speckles as the FBG’s reflection spectrum information carrier for demodulation. Instead of the commonly used InGaAs cameras, a quadrant detector (QD) was first utilized to record the speckle patterns in the experiments. Although the speckle images were severely compressed into four channel signals by the QD, the spectral features of the FBGs can still be precisely extracted with the assistance of a deep convolution neural network (CNN). The temperature and vibration experiments were demonstrated with a resolution of 1.2 pm. These results show that the new, to the best of our knowledge, speckle-based demodulation scheme can satisfy the requirements of both high-resolution and high-speed measurements, which should pave a new way for the optical fiber sensors.
15 May 2020 in Applied Optics
A near-infrared spectrometer based on offset fused multimode fiber (MMF) is investigated in this study. The light spectrum is recovered by analyzing the speckle images when light is passing through the MMF. In order to generate adequate speckles, a polarization maintaining fiber (PMF) and a 30 cm long MMF are fused with a vertical offset. Seven different offset displacements are implemented in the fiber fusion. The follow-up experiments show that the fiber offset fusion has a significant influence on the spectral correlation and the resolution. Larger offset fusion can excite more high-order modes in the MMF, and it greatly improves the spectrometer’s performance. The simulation results also show that more modes are excited in MMF, and the increase of mode number leads to lower correlation coefficients of the neighboring spectral channels. However, large offset fusion increases the fusion and the insertion loss of the whole system, which may bring difficulties in the low-light cases. In addition, an image denoising algorithm based on dynamic threshold filtering and a spectral reconstruction algorithm originated from complete orthogonal decomposition were used to remove the speckle pattern noise and recover the spectrum. The final speckle-based spectrometer has a spectral resolution of depending on the different offset fusions.
9 May 2024 in Optics and Lasers in Engineering
9 June 2025 in Optics & Laser Technology
7 September 2021 in Nanoscale
This work demonstrated a NIR speckle wavemeter using a visible CCD assisted by prepared NaErF4@NaYF4 upconversion nanoparticles. High wavelength precision was achieved through a designed neural network and cylindrical random scattering waveguide.