Agate Martin

Agate Martin

Auto-generated profile, based on publicly available information

Agate Martin

Leibniz University Hannover

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2022 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
AMAgate Martin
Agate Martin
PTPatrick Trinke
Patrick Trinke
BBBoris Bensmann
Boris Bensmann
RHRichard Hanke-Rauschenbach
Richard Hanke-Rauschenbach
Hydrogen crossover poses a critical issue in terms of the safe and efficient operation in polymer electrolyte membrane water electrolysis (PEMWE). The impact of key operating parameters such as temperature and pressure on crossover was investigated in the past. However, many recent studies suggest that the relation between the hydrogen crossover flux and the current density is not fully resolved. This study investigates the hydrogen crossover of PEMWE cells using a thin Nafion 212 membrane at current densities up to 10 A cm−2 and cathode pressures up to 10 bar, by analysing the anode product gas with gas chromatography. The results show that the hydrogen crossover flux generally increases over the entire current density range. However, the fluxes pass through regions with varying slopes and flatten in the high current regime. Only considering hydrogen diffusion as the single transport mechanism is insufficient to explain these data. Under the prevailing conditions, it is concluded that the electro-osmotic drag of water containing dissolved hydrogen should be considered additionally as a hydrogen transport mechanism. The drag of water acts opposite to hydrogen diffusion and has an attenuating effect on the hydrogen crossover in PEMWE cells with increasing current densities.

1 January 2022 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
AMAgate Martin
Agate Martin
PTPatrick Trinke
Patrick Trinke
MSMarkus Stähler
Markus Stähler
HHHintzen Hintzen
Hintzen Hintzen
FSFabian Scheepers
Fabian Scheepers
RHRichard Hanke-Rauschenbach
Richard Hanke-Rauschenbach
Hydrogen crossover poses a crucial issue for polymer electrolyte membrane (PEM) water electrolysers in terms of safe operation and efficiency losses, especially at increased hydrogen pressures. Besides the impact of external operating conditions, the structural properties of the materials also influence the mass transport within the cell. In this study, we provide an analysis of the effect of elevated cathode pressures (up to 15 bar) in addition to increased compression of the membrane electrode assembly on hydrogen crossover and the cell performance, using thin Nafion 212 membranes and current densities up to 3.6 A cm−2. It is shown that a higher compression leads to increased mass transport overpotentials, although the overall cell performance is improved due to the decreased ohmic losses. The mass transport limitations also become visible in enhanced anodic hydrogen contents with increasing compression at high current densities. Moreover, increases in cathode pressure are amplifying the compression effect on hydrogen crossover and mass transport losses. The results indicate that the cell voltage should not be the only criterion for optimizing the system design, but that the material design has to be considered for the reduction of hydrogen crossover in PEM water electrolysis.

1 December 2022 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
DADunia Abbas
Dunia Abbas
AMAgate Martin
Agate Martin
PTPatrick Trinke
Patrick Trinke
MBMarkus Bierling
Markus Bierling
BBBoris Bensmann
Boris Bensmann
TBThomas Böhm
Thomas Böhm
Integrating platinum-based recombination catalysts into proton exchange membrane water electrolysis systems effectively reduces the anodic hydrogen content. We studied the effect of the platinum loading of an interlayer close to the anode within the membrane on the anodic hydrogen in oxygen content. For the investigated Pt-loadings between 1 μgPt cm−2 and 140 μgPt cm−2, the results revealed that for a 110 μm membrane, 7 μgPt cm−2 were sufficient to allow a safe operation at cathode pressures up to 10 bar. A further increase of the Pt-loading did not significantly improve the reduction of the anodic hydrogen in oxygen content.

1 September 2021 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
AMAgate Martin
Agate Martin
DADunia Abbas
Dunia Abbas
PTPatrick Trinke
Patrick Trinke
TBThomas Böhm
Thomas Böhm
MBMarkus Bierling
Markus Bierling
RHRichard Hanke-Rauschenbach
Richard Hanke-Rauschenbach
Gas crossover through the membrane poses a significant challenge to proton exchange membrane water electrolysers. This work investigates the influence of the position of platinum-based recombination interlayers integrated in the membrane on the anodic hydrogen in oxygen content. The results show that all interlayer positions reduce the anodic hydrogen content without performance losses compared to the reference without interlayer. However, an interlayer positioned closer to the anode is more effective than closer to the cathode. Further, the effect of the interlayer is more pronounced with increasing anode pressure.

11 November 2021 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
AMAgate Martin
Agate Martin
PTPatrick Trinke
Patrick Trinke
Chuyen Van PhamChuyen Van Pham
Chuyen Van Pham
MBMelanie Bühler
Melanie Bühler
MBMarkus Bierling
Markus Bierling
RHRichard Hanke-Rauschenbach
Richard Hanke-Rauschenbach
Altogether five platinum group metal (PGM) and PGM-free cathode catalysts were investigated in full PEM water electrolysis cells regarding their polarisation behaviour and their hydrogen and oxygen recombination properties. It was shown that the recombination activity of permeated oxygen and evolved hydrogen within the cathodic catalyst layer correlates with the activity of the oxygen reduction reaction (ORR) which was determined ex situ with linear sweep voltammetry. We found that the investigated PGM-free cathode catalysts had a low activity for the ORR resulting in higher measurable oxygen in hydrogen volume fractions compared to the PGM catalysts, which are more active for the ORR. Out of the three investigated PGM-free catalysts, only one commercially available material based on a Ti suboxide showed a similar good polarisation behaviour as the state of the art cathode catalyst platinum, while its recombination activity was the lowest of all catalysts. In addition to the recombination of hydrogen and oxygen on the electrocatalysts, we found that the prevalent carbon-based cathodic porous transport layers (PTL) also offer catalytically active recombination sites. In comparison to an inactive PTL, the measurable oxygen flux using carbon-based PTLs was lower and the recombination was enhanced by microporous coatings with high surface areas.

22 December 2023 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
DADunia Abbas
Dunia Abbas
AMAgate Martin
Agate Martin
PTPatrick Trinke
Patrick Trinke
MBMarkus Bierling
Markus Bierling
BBBoris Bensmann
Boris Bensmann
TBThomas Boehm
Thomas Boehm
Hydrogen crossover through the membrane is a significant safety concern in proton exchange membrane water electrolyzers (PEMWEs). This issue is predominant at low loads, which contradicts the application of PEMWEs in conjunction with fluctuating renewable energy sources that require the electrolyzer to switch between low- and high-load operation. The risk of flammable or explosive oxygen-hydrogen mixtures on the anode side of the electrolyzer prevents the application of membranes as thin as in fuel cells, which results in relatively large Ohmic losses. A means to mitigate the accumulation of hydrogen in the oxygen compartment is the integration of platinum nanoparticles as a recombination catalyst interlayer within the membrane that catalyzes the recombination of hydrogen and oxygen to water. It was shown that such an interlayer effectively minimizes the hydrogen concentration on the anode side without reducing the cell performance.1 Thus, this technology can pave the way toward thinner membranes and more efficient electrolyzers. However, the interlayer should not increase the costs of the membrane electrode assembly by excessive Pt loading. Hence, we investigated the ideal position of this recombination interlayer within the membrane,2 and we performed a parameter study on the minimum required catalyst loading for an effective hydrogen-in-oxygen reduction.3 We find that the best position for the interlayer is close to the anode due to the lower oxygen permeability of the membrane. Also, a loading of 10 µg per cm² of platinum nanoparticles is sufficient to reduce the anodic hydrogen content from more than 2.5 vol.% (without interlayer) to approx. 0.5 vol.% when operating a PEMWE cell with a 110 µm thick membrane at 0.5 A/cm² and a differential pressure of 10 barc/1 bara. In summary, we are able to show that low platinum loadings within the membrane are sufficient to reduce the anodic hydrogen content in PEMWEs to safe values without impairing the electrochemical performance of the cell. References C. Klose, P. Trinke, T. Böhm, B. Bensmann, S. Vierrath, R. Hanke-Rauschenbach and S. Thiele, J. Electrochem. Soc., 165(16), F1271-F1277 (2018). A. Martin, D. Abbas, P. Trinke, T. Böhm, M. Bierling, B. Bensmann, S. Thiele and R. Hanke-Rauschenbach, J. Electrochem. Soc., 168(9), 94509 (2021). D. Abbas, A. Martin, P. Trinke, M. Bierling, B. Bensmann, S. Thiele, R. Hanke-Rauschenbach and T. Böhm, J. Electrochem. Soc., 169(12), 124514 (2022).