19 January 2010 in IEEE Transactions on Magnetics
The uncoated magnetite and the 2, 3-meso-dimercaptosuccinic acid (DMSA)-coated Fe3O4 nanoparticles were synthesized by a coprecipitation method, respectively. The DMSA surface modification on magnetite nanoparticles was observed by FT-IR. The average particle sizes of the uncoated magnetite and the DMSA coated magnetite were exhibited approximately 10.4 and 12.3 nm by TEM results. DMSA surface-coated Fe3O4 can introduce a dense and thin outer hydroxyl group (-OH) shell. In order to characterize the magnetic behaviors, the magnetization processes of the magnetic nanoparticles were measured with the temperature range of 5 K to 300 K. The mean blocking temperatures of the uncoated Fe3O4 and the DMSA surface-coated Fe3O4 exhibited about 172 ±28 K and 215 ±30 K, respectively. The value of magnetization of the DMSA-coated Fe3O4 nanoparticles was not so different with that of the uncoated Fe3O4.
1 December 2023 in ECS Journal of Solid State Science and Technology
This work investigates the size-dependent decrease in external quantum efficiency (EQE) of various InGaN/GaN multiple-quantum-well flip-chip blue micro light-emitting diodes (μ-LEDs) of sizes from 10 × 10 μm2 to 250 × 250 μm2 and proposes that the temperature-dependent efficiency droop is the main mechanism for decrease in EQE with reducing dimensions for well-passivated μ-LEDs. Experimental results show that the EQE increases with reducing μ-LED sizes to 50 × 50 μm2. However, the EQE decreases as the μ-LED size is further reduced to 10 × 10 μm2. The measured current-voltage characteristics, the minimum ideality factor, the light-emission patterns by the photon-emission microscope, and the transmission-electron-microscopy images consistently reveal that the decreased EQE of the smallest sized μ-LED is not due to the sidewall leakage: the decreased EQE is rather caused by the temperature-dependent efficiency droop (T-droop), which is systematically found by investigating the blueshift in peak emission wavelength and calculating the thermal resistance (Rth) that increases with the reduced mesa area. The decrease in peak EQE at 440 K compared to 300 K is also presented, which demonstrates that the reduction in peak EQE increases with reducing μ-LED sizes. It is pointed out that the small-sized μ-LEDs suffer from higher junction temperature due to lower heat dissipation caused by higher Rth compared to large-sized μ-LEDs.
27 January 2025 in Applied Physics Letters
This study presents an approach for enhancing the external quantum efficiency (EQE) of multiple-quantum-well InGaN/AlGaN near-ultraviolet (NUV) micro-light-emitting diodes (micro-LEDs) without changing the epitaxial layer. Unlike the size-dependent EQE reduction observed in blue, green, and red micro-LEDs, the EQE of NUV micro-LEDs at high current densities (≥10 A/cm2) improves as the device dimensions shrink from 500 × 500 μm2 to 20 × 20 μm2. A 20 × 20 μm2 micro-LED achieves a peak EQE of 12.3%, compared to 8.60% for a larger 500 × 500 μm2 micro-LED. Experimental results attribute this EQE enhancement to improved light-extraction efficiency, driven by better current spreading. In larger micro-LEDs, pronounced current crowding causes carrier overflow from the active region, leading to reduced EQE at high current densities. These findings highlight the promising potential of NUV micro-LEDs for diverse applications.
23 September 2025 in Materials Horizons
A full-color neuromorphic image processor was realized using a homostructure metal oxide phototransistor via subgap engineering with interstitial alkali metal elements.