22 July 2023 in Combustion Engines
Article introduces and discusses the sensors used in autonomous cars. The reliability of these devices is crucial for the proper operation of autonomous driving systems. The research works related to the issue of the performance of autonomous sensors in adverse weather conditions is discussed and critically analysed. The negative effects caused by bad weather conditions are characterised. The paper presents the result of author's own research concern on the effects of rain, snow and fog on lidar measurments. The results obtained are presented, detailing the most important threats from each weather phenomenon. Attempts currently being made to address these issues are presented as well. The paper concludes with a summary of the research results, the current state of knowledge and suggestions for future developments.
30 June 2023 in Transport Problems
2 September 2025 in Journal of Theoretical and Applied Mechanics
This paper presents a proprietary steering algorithm for path following, whose advantage lies in its ability to be applied with vehicle dynamic models of varying complexity. The proposed algorithm was implemented using models with 3 and 10 degrees of freedom, which had been previously verified....
15 September 2025 in Combustion Engines
This study proposes an extended model with ten degrees of freedom (10 DoF), developed using the Newton–Euler formalism. Analytical derivation of the mass matrix and the vector of right-hand sides enables a significant reduction in computation time by eliminating matrix operations. For comparison, another 10 DoF model based on the homogeneous and joint coordinate transformation method is also considered. The aim is to assess how the choice of modeling formalism affects both computational efficiency and the fidelity of real-world motion representation. All three models (3 DoF and both 10 DoF variants) were tested in simulations of an overtaking maneuver under varying weather conditions. The analysis focused on differences in steering angle trajectories and tracking errors. Additional evaluations included a lane-change maneuver and a 736-meter driving scenario. Results show that extended models provide improved accuracy and better capture of dynamic vehicle behavior. In particular, the Newton–Euler-based 10 DoF model offers significant computational advantages. The maximum observed difference in steering angle between models reached 2 degrees, attributed to the 3 DoF model’s simplified treatment of tire forces and lack of friction coefficient consideration. The proposed models show strong potential for implementation in motion planning for autonomous vehicles.
25 June 2026 in Archives of Control Sciences
This study presents and evaluates three steering angle selection methods formulated for path following tasks. The methods determine the steering angle input through numerical integration of the vehicle equations of motion over a finite prediction horizon, divided into small time subintervals. The first approach introduces classical Nelder-Mead optimization algorithm when the steering angle is defined by minimizing a cost functional which is trajectory-tracking error. In the second and third cases the minimization of the cost functional is obtained by applying the following numerical methods: Newton iteration and bisection. The methods are applicable to vehicle dynamics models of varying complexity. Presented methods have been evaluated using planar (3 degrees of freedom — DoF) and spatial (10-DoF) vehicle models. Simulation results demonstrate that proposed approaches achieve trajectory-tracking accuracy comparable to those reported in literature. The bisection-based method provides balance between accuracy and computational efficiency, enabling reliable steering angle computation for trajectories with varying curvature and non-uniform speed profiles. A key advantage of the proposed numerical methods is their ability to incorporate nonlinear vehicle dynamics while significantly reducing the computational effort compared to conventional optimization-based approaches
1 September 2026 in Transport Problems
In geometric path-tracking algorithms, the desired steering signal is primarily determined by the curvature of the reference path. This paper presents the path approximation methods that use 3rd- and 5th- degree spline functions. It shows how the type and number of spline segments affect accuracy in terms of approximation errors and trajectory tracking errors. Particular attention was given to the resulting curvature profiles. Simulation results confirm the proposed methods' feasibility. The application of the B3M algorithm was applied using a simple vehicle dynamics model in the path tracking task. The results show that the selection of trajectory approximation parameters has a significant impact on vehicle motion simulation results. This paper demonstrates the relationships between the approximation method used, the waypoint count, and the spline segment count. The results show the need for further research in this area, but they already provide important insights in the context of autonomous vehicle trajectory planning. Unlike previous studies focusing primarily on approximation accuracy, this work demonstrates that the approximation method and the number of spline segments can significantly affect the generated curvature profile and consequently the steering commands required for path tracking.