1 February 2015 in Journal of Applied Research and Technology
In this article authors present an application of spatial processing methods for GPS spoofing detection and mitigation. In the first part of this article, a spoofing detection method, based on phase delay measurements, is proposed. Accuracy and precision of phase delay estimation is assessed for various qualities of received signal. Spoofing detection thresholds are determined. Efficiency of this method is evaluated in terms of probability of false alarm and probability of detection when 4 to 8 GPS signals are received. It is shown that the probability of spoofing detection is greater than 99 percent if carrier-to-noise ratio is at least 46dBHz. The second part of the article presents a GPS spoofing mitigation method which uses spatial filtering (null-steering) for excision of undesired signals. Performance of this method is analyzed in various conditions. Attenuation of undesired signals is estimated to be at least 60dB when their signal-to- noise ratio is high. Furthermore, statistical analysis of the spatial filtering influence on the availability of true signals is provided. Eventually, a concept of practical anti-spoofing system implementation is proposed
30 June 2016 in IEEE Transactions on Antennas and Propagation
This paper presents an off-body channel model for body area networks (BANs) in indoor environments. The proposed model, which is based on both simulations and measurements in a realistic environment, consists of three components: mean path loss, body shadowing, and multipath fading. Seven scenarios in a realistic indoor office environment containing typical scatterers have been measured: five were static (three standing and two sitting) and two dynamic (walk in a fixed place and real walk). The measurement equipment and measurement procedures are described. The mean path loss component is modeled as a log function of distance, the path loss exponent being in the range between 0.4 and 1.6, while a statistical perspective is taken for the other two components, i.e., body shadowing is found to be well modeled by a log normal distribution and multipath fading by Rice or Nakagami-m distributions, depending on body motion characteristics. The correlation between the selected distributions and empirical data is not lower than 0.95, typically being greater than 0.98. The novelty of this model is that it takes the statistical influence of various parameters and features present in BANs into account, such as body influence, placement of the wearable antennas, user orientation in the environment, dynamism of the BAN scenario, and propagation conditions.
7 October 2008 in Critical Reviews in Analytical Chemistry
The growing interest in obtaining rapid and more reliable data on air quality indicates a need for non-stationary (transportable and portable) instrumentation. This trend results in the designing and manufacturing of new instruments that are more sensitive, selective, precise and accurate. This paper presents some examples of new instrumentation based on different principles. In the first part, a general classification of devices used for air monitoring and analysis is presented. Finally, the mobile monitoring system (MMS) proposed by the authors for air monitoring along communication lanes is briefly described.
1 April 2010 in Review of Scientific Instruments
The paper presents a prototype of a mobile monitoring system for measuring the levels of the main traffic air pollutants ( , , , CO, and ,) in cities. The novelty of the proposed system lies in the fact that it can be utilized to monitor emissions from urban traffic along roads and areas where traditional monitoring stations cannot be placed. In the proposed system, the monitoring device can be mounted on any moving vehicle (such as a car, bus, or truck) rather than be attached to a dedicated van, as most systems of this kind found in literature are. Analyzers used in this system are small portable structures that contain an electronic instrument to measure, record, and transmit relevant data on concentrations of the pollutants to a website. The model outcome for carbon monoxide obtained in functional tests in real conditions is also presented here. Data on temporal changes of carbon monoxide concentration are compared against meteorological parameters and speed of the vehicle. Spatial interpolation techniques are applied to obtain a nonplanar visualization of carbon monoxide and benzene concentrations in the main arteries of a city.
1 January 2009 in Polish Maritime Research
This paper presents a description of new global monitoring system for containers with its layer-modular structure, as a solution for enhance security and efficiency of container transport with particular emphasis on the practical implementation of that system for maritime container terminals. Especially the Smart Container Module (SCM) architecture and its operation as a part of the Self-Organizing Container Monitoring Network is presented.