23 May 2017 in Advanced Energy Materials
Advanced electrode materials with bendability and stretchability are critical for the rapid development of fully flexible/stretchable lithium‐ion batteries. However, the sufficiently stretchable lithium‐ion battery is still underdeveloped that is one of the biggest challenges preventing from realizing fully deformable power sources. Here, a low‐temperature hydrothermal synthesis of a cathode material for stretchable lithium‐ion battery is reported by the in situ growth of LiMn2O4 (LMO) nanocrystals inside 3D carbon nanotube (CNT) film networks. The LMO/CNT film composite has demonstrated the chemical bonding between the LMO active materials and CNT scaffolds, which is the most important characteristic of the stretchable electrodes. When coupled with a wrinkled MnOx/CNT film anode, a binder‐free, all‐manganese‐based stretchable full battery cell is assembled which delivers a high average specific capacity of ≈97 mA h g−1 and stabilizes after over 300 cycles with an enormous strain of 100%. Furthermore, combining with other merits such as low cost, natural abundance, and environmentally friendly, the all‐manganese design is expected to accelerate the practical applications of stretchable lithium‐ion batteries for fully flexible and biomedical electronics.
6 March 2023 in Biosensors and Bioelectronics
5 May 2024 in Advanced Science
Solar panels often suffer from dust accumulation, significantly reducing their output, especially in desert regions where many of the world's largest solar plants are located. Here, an autonomous dust removal system for solar panels, powered by a wind‐driven rotary electret generator is proposed. The generator applies a high voltage between one solar panel's output electrode and an upper mesh electrode to generate a strong electrostatic field. It is discovered that dust particles on the insulative glass cover of the panel can be charged under the high electrical field, assisted by adsorbed water, even in low‐humidity environments. The charged particles are subsequently repelled from the solar panel with the significant Coulomb force. Two panels covered with sand dust are cleaned in only 6.6 min by a 15 cm diameter rotary electret generator at 1.6 m s−1 wind speed. Experimental results manifest that the system can work effectively in a wide range of environmental conditions, and doesn't impact the panel performance for long‐term operation. This autonomous system, with its high dust removal efficiency, simplicity, and low cost, holds great potential in practical applications.
7 August 2023 in Nano Energy
16 April 2024 in Energy & Environmental Science
With the development of electrostatic generators, air breakdown has become the main obstacle to further enhancing their output. Utilization of external circuitry to regulate the excited electric field strength in the generator's air gap for suppressing air breakdown is an effective approach. However, there is a lack of a standard metric for evaluating and optimizing its design. Here, we report a novel and standard metric utilizing plot to evaluate both the generator's output and upper limit, guiding its design under air breakdown limitation. Moreover, we introduce a concept of segmented tuning of the generator's gap electric field to expand the area of plot for enhancing the generators’ output. Integrated with the charge-excitation strategy, an ultrahigh charge density of 1.89 mC m−2, energy density of 289 mJ m−2 per cycle, and DC output power of 152 mW m−2 Hz−1 are all achieved at a 100 μm separation, capable of powering 20 portable calculators at 1 Hz. This study offers new insights to boost the electrostatic generators’ output under air breakdown limitation.
6 March 2024 in Microsystems & Nanoengineering
Electrostatic generators show great potential for powering widely distributed electronic devices in Internet of Things (IoT) applications. However, a critical issue limiting such generators is their high impedance mismatch when coupled to electronics, which results in very low energy utilization efficiency. Here, we present a high-performance energy management unit (EMU) based on a spark-switch tube and a buck converter with an RF inductor. By optimizing the elements and parameters of the EMU, a maximum direct current output power of 79.2 mW m-2 rps-1 was reached for a rotary electret generator with the EMU, achieving 1.2 times greater power output than without the EMU. Furthermore, the maximum power of the contact-separated triboelectric nanogenerator with an EMU is 1.5 times that without the EMU. This excellent performance is attributed to the various optimizations, including utilizing an ultralow-loss spark-switch tube with a proper breakdown voltage, adding a matched input capacitor to enhance available charge, and incorporating an RF inductor to facilitate the high-speed energy transfer process. Based on this extremely efficient EMU, a compact self-powered wireless temperature sensor node was demonstrated to acquire and transmit data every 3.5 s under a slight wind speed of 0.5 m/s. This work greatly promotes the utilization of electrostatic nanogenerators in practical applications, particularly in IoT nodes.