22 February 2023 in Advanced Materials
Atomic Fe in N‐doped carbon (FeNC) electrocatalysts for oxygen (O 2 ) reduction at the cathode of proton exchange membrane fuel cells are the most promising alternative to platinum‐group‐metal catalysts. Despite recent progress on atomic FeNC O 2 reduction, their controlled synthesis and stability for practical applications remain challenging. A two‐step synthesis approach has recently led to significant advances in terms of Fe‐loading and mass activity; however, the Fe utilization remains low owing to the difficulty of building scaffolds with sufficient porosity that electrochemically exposes the active sites. Herein, this issue is addressed by coordinating Fe in a highly porous nitrogen‐doped carbon support (≈3295 m 2 g −1 ), prepared by pyrolysis of inexpensive 2,4,6‐triaminopyrimidine and a Mg 2+ salt active site template and porogen. Upon Fe coordination, a high electrochemical active site density of 2.54 × 10 19 sites g FeNC −1 and a record 52% FeN
x
electrochemical utilization based on in situ nitrite stripping are achieved. The Fe single atoms are characterized pre‐ and post‐electrochemical accelerated stress testing by aberration‐corrected high‐angle annular dark field scanning transmission electron microscopy, showing no Fe clustering. Moreover, ex situ X‐ray absorption spectroscopy and low‐temperature Mössbauer spectroscopy suggest the presence of penta‐coordinated Fe sites, which are further studied by density functional theory calculations.
3 November 2023 in Green Chemistry
Sluggish kinetics in the oxygen reduction reaction (ORR) require significant quantities of expensive Pt-based nanoparticles on carbon (Pt/C) as the electrocatalyst at the cathode of proton exchange membrane fuel cells (PEMFCs). This catalyst requirement hinders their large-scale implementation. Single atom Fe in N-doped C (Fe-N-C) electrocatalysts offer one of the best non-Pt-based ORR activities to date but their environmental impacts have not been studied and their production costs are rarely quantified. Herein, we report a comparative life-cycle assessment and techno-economic analysis of replacing Pt/C with Fe-N-C at the cathode of an 80 kW PEMFC stack. In the baseline scenario (20 gPt/C vs. 690 gFe-N-C), we estimate that Fe-N-C could reduce damages on ecosystems and human health by 88–90% and 30–44%, respectively, while causing a comparable impact on resource depletion. The environmental impacts of Pt/C predominantly arise from the Pt precursor while those of Fe-N-C are presently dominated by the electricity consumption. The monetized costs of environmental externalities for both Fe-N-C and Pt/C catalysts exceed their respective direct production costs. Based on catalyst performance with learning curve analysis at 500,000 PEMFC stacks per annum, we estimate replacing Pt/C with Fe-N-C would increase PEMFC stack cost from 13.8 to 41.6 USD kW-1. The cost increases despite a reduction in cathode catalyst production cost from 3.41 to 0.79 USD kW-1 (excluding environmental externalities). To be cost-competitive with a Pt-based PEMFC stack delivering 1160 mW cm-2, the same stack with Fe-N-C based cathode would need to reach 874 mW cm-2 at 0.657 V, equivalent to a 200% performance improvement. These findings demonstrate the need for continued Fe-N-C activity development with sustainable synthesis routes in mind to replace Pt-based cathode catalyst in PEMFCs.
30 July 2024 in Energy & Environmental Science
Fe cations produced during the reduction of O 2 on Fe–N–C materials transform into Fe-oxides due to a local increase in pH.
10 May 2023 in Energy & Environmental Science
The electrochemical conversion of biomass to high-value platform chemicals as a potential means to reduce our reliance on crude oil offers environmental advantages, in comparison to thermal catalysis as it takes place at room temperature and pressure. In this study, we investigate the electrochemical reduction of a biomass-derived chemical, furfural, using Cu and Co single-atom catalysts supported on carbon electrodes via non-covalent adsorption. Under mild basic electrolyte (pH 10) we have selectively produced hydrofuroin, a valuable and promising precursor to sustainable drop-in jet fuels. Density functional theory (DFT) calculations were carried out to unveil that the weak-binding molecular catalysts could give rise to a facile reaction path towards the electrochemical production of hydrofuroin. The calculated adsorption energies of furfural and hydrogen on different types of catalysts aid in mapping the experimental selectivity for furfural electroreduction, offering a general catalyst design blueprint for this reaction. Based on theoretical calculations, we tested Co and Cu phthalocyanines (Pc) adsorbed onto multi-walled carbon nanotubes (MWCNTs) to show that these single-atom molecular catalysts can display up to 65.3% faradaic efficiency for hydrofuroin production with low amounts of hydrogen evolution in pH 10 at −0.50 V vs. RHE. The stability of CoPc and CuPc towards furfural reduction is probed by time-of-flight secondary ion mass spectrometry (ToF-SIMS), where CoPc is found to be more stable with only 16% reduction in normalised counts, compared to 67% for CuPc. Mechanistically, we suggest that the rate-determining step for hydrofuroin formation on single-atom molecular catalysts should be the first proton-coupled electron transfer prior to radical coupling, which could possibly happen in solution. Our work provides new insights into utilizing single-atom catalysts for the biomass electrovalorisation to value-added fuels and chemicals.
11 February 2022 in Journal of Materials Chemistry A
Single-atom catalysts, in particular the Fe–N–C family of materials, have emerged as a promising alternative to platinum group metals in fuel cells as catalysts for the oxygen reduction reaction. Numerous theoretical studies have suggested that dual atom catalysts can appreciably accelerate catalytic reactions; nevertheless, the synthesis of these materials is highly challenging owing to metal atom clustering and aggregation into nanoparticles during high temperature synthesis treatment. In this work, dual metal atom catalysts are prepared by controlled post synthetic metal-coordination in a C2N-like material. The configuration of the active sites was confirmed by means of X-ray adsorption spectroscopy and scanning transmission electron microscopy. During oxygen reduction, the catalyst exhibited an activity of 2.4 ± 0.3 A gcarbon −1 at 0.8 V versus a reversible hydrogen electrode in acidic media, comparable to the most active in the literature. This work provides a novel approach for the targeted synthesis of catalysts containing dual metal sites in electrocatalysis.
5 October 2023 in Journal of Materials Chemistry A
Proton exchange membrane fuel cells require reduced construction costs to improve commercial viability, which can be fueled by elimination of platinum as the O2 reduction electrocatalyst. The past 10 years has seen significant developments in synthesis, characterisation, and electrocatalytic performance of the most promising alternative electrocatalyst; single metal atoms coordinated to nitrogen-doped carbon (M-N-C). In this Perspective we recap some of the important achievements of M-N-Cs in the last decade, as well as discussing current knowledge gaps and future research directions for the community. We provide a new outlook on M-N-C stability and atomistic understanding with a set of original density functional theory simulations.