17 October 2022 in Journal of Materials Science & Technology
9 March 2022 in Acta Materialia
9 December 2024 in Acta Astronautica
1 July 2022 in MATERIALS TRANSACTIONS
It is desirable to develop high temperature shape memory alloys (HTSMAs) with a martensitic transformation start temperature (Ms) above 100°C and a recoverable strain of about 4–6% in the shape memory effect. The latter property is achieved with low variant reorientation stress due to easy detwinning of martensite and high plastic deformation stress due to precipitation strengthening. We previously demonstrated facilitation of detwinning for Ti–Zr–Ni–Pd quaternary alloy systems through controlling the crystal structure of martensite, and proposed that Ti–(15–20)Zr–49.7Pd (at%) and surrounding Ni-containing compositions are candidates of HTSMAs having low variant reorientation stress. On the other hand, the aging condition for precipitation strengthening was not optimized, since the candidate alloys show a complex precipitation behavior of two types of precipitates, Ti2Pd-type and H-phase. Therefore, in this study, the effects of aging on precipitation behavior, martensitic transformation temperatures, and shape memory properties were investigated for one of the candidate alloys, Ti–20Zr–49.7Pd, and an excellent shape memory effect with Ms above 130°C, a low reorientation stress around 200 MPa, a high plastic deformation stress around 1800 MPa, and a large recovery strain of 4.5% was achieved after an optimum aging treatment. On the other hand, short-range ordering of solute atoms occurs just above the reverse transformation temperature and decreases Ms, which would limit the number of shape recovery operations when the alloy is used as a device.
9 February 2025 in Journal of the American Ceramic Society
The growing demand for lightweight, heat‐resistant aerospace structures with intricate geometries has driven the integration of non‐oxide ceramics and Ti alloys, addressing the inherent workability and scalability challenges associated with ceramics when used independently. Brazing with eutectic Ag–Cu‐based fillers has emerged as a pivotal technique for fabricating reliable joints between these dissimilar materials. This paper provides a focused overview of strategies to enhance the mechanical reliability of brazed joints between Ti alloys and non‐oxide ceramics, focusing on Ti–6Al–4V (mass%) and Si 3 N 4 . Key challenges influencing joint strength are discussed, including tensile residual stresses from mismatched coefficients of thermal expansion, the limited plastic deformability of Ti‐alloy substrates, and the formation of hard Ti‐based intermetallic compounds. Recent advancements to overcome these challenges are highlighted, such as the use of ductile, non‐reactive interlayers, transient liquid phase bonding, high‐plastic‐deformability braze fillers, and the optimization of both the intrinsic properties of ceramics and joint geometries. This overview provides valuable insights that extend beyond Ti‐alloy/non‐oxide‐ceramic joints, offering strategies applicable to the broader field of dissimilar material bonding.
1 January 2018 in Aerospace Technology Japan, the Japan Society for Aeronautical and Space Sciences
Ceramic/metal brazing was investigated to produce light-weight and highly-efficient ceramic thrusters. Silicon nitride ceramic and metal bars were brazed using an Ag-based brazing material. Four-point bend tests were conducted at room and high temperatures to evaluate the strength of the brazed joints. Computational fluid dynamics (CFD) and finite element method (FEM) analyses were also performed to investigate the effect of the construction and shape of the joints on the stress distribution around them. It was demonstrated that brazing was a great candidate as the joining technique, and a 20 N ceramics/metal brazed thruster was successfully produced.