13 March 2024 in IEEE Transactions on Components, Packaging and Manufacturing Technology
In this article, a novel dual band (DB) filtering power divider (FPD) with full-frequency isolation is presented. The proposed topology consists of 4 coupled line sections (CLSs), 2 ring resonators (RRs), 2 shunted stepped impedance resonators (SIRs), 2 transmission lines (TLs) and 1 isolation network (INW). Through mathematical analysis of its S 11 and S 21 parameters, simultaneous equations for characteristic impedances are derived with the proposed algorithm. In-band equal-ripple and 6 out-of-band transmission zeros (TZs) can be obtained. In order to realize full-frequency isolation performance, the closed-form design equations and their circuit simulation results of four types of INW are newly summarized and discussed in detail. The isolation level can be adjusted by virtue of the position of the extra TZ of S 32 parameter in the desired passband. For verification of the proposed synthesis theory, a general design flowchart is provided, several design examples are then selected and compared in detail. Finally, an DB FPD prototype is designed and fabricated for experimental demonstration. Measured results match the proposed theory very well, and the isolation level is below -20.4 dB in full-frequency range.
13 April 2022 in IEEE Antennas and Wireless Propagation Letters
This study presented an implementation of weighted-polarization multiple-input multiple-output (MIMO) antenna for wireless body area networks (BANs) at 2.45 GHz. The weight function determined by considering the variation in the cross-polarization power ratio (XPR) and the antenna tilt angle was realized by a 2-way power divider (PD), where tunable power ratio range of proposed PD could not only cross the boundary of equal power ratio (k2 = 1), but also maintain a wide tunable range at the same time. The patch array antenna fed by the proposed PD consists of microstrip lines, capacitors, resistors and varactor diodes can overcome the polarization mismatch in dynamic off-body channel due to the variation in radio-propagation environment and human movement by adjusting the bias voltages. The experiment of 22 MIMO channel capacity was conducted using a three-dimensional spatial fading emulator. The measured and simulated results are in good agreement. Under the considered condition of arm-swinging angle and the XPR, the tunable power ratio range of proposed PD can be realized from 1.25 dB to 20 dB, therefore, it is suitable for radio-frequency (RF) control antenna to obtaining high data transmission in future wearable MIMO applications.
8 October 2024 in IEEE Transactions on Microwave Theory and Techniques
In this article, a quasi-elliptic wideband bandstop filter (BSF) is presented with the proposed synthesis theory. In order to analyze the novel mechanism of creating extra two reflection zeros (RZs) in back-to-back open-ended spanner structure, both without coupling structure (BSF I) and with coupling structure (BSF II) are analyzed and discussed in detail where BSF I consists of two open stubs, two cascaded transmission lines (TLs), and a stepped-impedance open stub, which is shunted in the center of the filter; by dividing the stepped-impedance open stub into two coupled line (CL) sections, BSF I becomes BSF II, which includes a back-to-back open-ended spanner structure. The proposed synthesis theory proves that BSFs I and II belong to the same theoretical quasi-elliptic response transfer function. Considering the urgent needs of design specifications for BSF, the proposed synthesis theory could directly design and control the stopband with equal-ripple performance, such as the fractional bandwidth of $S_{21}$ (FBW $^{{S_{21}}}$ ) and stopband rejection of $S_{{21}}$ (SR). After design theory, flowchart and design charts are summarized and discussed, and six design examples are also selected for theoretical verification. Furthermore, by inserting 2 $N$ TLs in the center of the proposed filter, extra 2 $N$ RZs can be generated accordingly. Because of limited pages, only two selected examples are listed for demonstration. Finally, two fabricated circuits for BSFs I and II are fabricated at 1 GHz for experimental demonstration. Excellent agreement between the simulated and measured results is achieved so as to successfully prove the proposed synthesis theory.
20 May 2024 in IEEE Microwave and Wireless Technology Letters
In this letter, a compact planar $N$ -way hybrid power divider (HPD) is presented with $\lambda $ /4 $N$ -parallel transmission lines (TLs). To realize good reflection and isolation performance among output ports in the planar structure, a ( $N-1)$ $\times$ ( $N- 1$ ) isolation network is newly shunted in the $\lambda $ /4 $N$ -parallel TLs in the proposed HPD, where the proposed isolation network includes one column of resistors and $N- 2$ columns of capacitors. All the design parameters can be summarized and calculated by one even-mode and $N- 1$ odd-mode analysis. In the experiment, two fabricated circuits show good reflection and isolation performance at all output ports. Compared with former works, $N$ can be selected arbitrarily, and fabricated circuits could be very compact.