This paper presents a multiple-input, multiple-output (MIMO) antenna system with the ability to perform full-azimuth beam steering, and with the aim of realizing greater than 20 Gbps vehicular communications. The MIMO antenna described in this paper comprises 64 elements arranged in a daisy chain array structure, where 32 subarrays are formed by pairing elements in each subarray; the antenna yields 32 independent subchannels for MIMO transmission, and covers all communication targets regardless of their position relative to the array. Analytical results reveal that the proposed antenna system can provide a channel capacity of more than 200 bits/s/Hz at a signal-to-noise power ratio (SNR) of 30 dB over the whole azimuth, which is equivalent to 20 Gbps for a bandwidth of 100 MHz. This remarkably high channel capacity is shown to be due to two significant factors; the improved directivity created by the optimum in-phase excitation and the low correlation between the subarrays due to the orthogonal alignment of the array with respect to the incident waves. Over-the-air (OTA) experiments confirm the increase in channel capacity; the proposed antenna can maintain a constant transmission rate over all azimuth angles.
1 January 2016 in IEICE Transactions on Communications
This study presented an implementation of weighted-polarization multiple-input multiple-output (MIMO) antenna for wireless body area networks (BANs) at 2.45 GHz. The weight function determined by considering the variation in the cross-polarization power ratio (XPR) and the antenna tilt angle was realized by a 2-way power divider (PD), where tunable power ratio range of proposed PD could not only cross the boundary of equal power ratio (k2 = 1), but also maintain a wide tunable range at the same time. The patch array antenna fed by the proposed PD consists of microstrip lines, capacitors, resistors and varactor diodes can overcome the polarization mismatch in dynamic off-body channel due to the variation in radio-propagation environment and human movement by adjusting the bias voltages. The experiment of 22 MIMO channel capacity was conducted using a three-dimensional spatial fading emulator. The measured and simulated results are in good agreement. Under the considered condition of arm-swinging angle and the XPR, the tunable power ratio range of proposed PD can be realized from 1.25 dB to 20 dB, therefore, it is suitable for radio-frequency (RF) control antenna to obtaining high data transmission in future wearable MIMO applications.
This paper presents an over-the-air testing method in which a full-rank channel matrix is created for a massive multiple-input multiple-output (MIMO) antenna system utilizing a fading emulator with a small number of scatterers. In the proposed method, in order to mimic a fading emulator with a large number of scatterers, the scatterers are virtually positioned by rotating the massive MIMO antenna. The performance of a 64-element quasi-half-wavelength dipole circular array antenna was evaluated using a two-dimensional fading emulator. The experimental results reveal that a large number of available eigenvalues are obtained from the channel response matrix, confirming that the proposed method, which utilizes a full-rank channel matrix, can be used to assess a massive MIMO antenna system.
20 January 2025 in IEEE Internet of Things Journal
This paper presents a highly compact multiple-input multiple-output (MIMO) antenna system that maintains a high and stable channel capacity above 20 bits/s/Hz in dynamic channels for human-centric Internet of Things (IoT) devices. The MIMO array consists of four compact antenna elements and four compact control circuits operating at 2.45 GHz. This antenna system achieves a 64.5% reduction in dimension compared to the traditional microstrip patch. Each antenna is connected to a compact control circuit, boasting a wide power-tunable range exceeding 30.3 dB and a phase difference within 90∘ ± 15∘. The transmission coefficient between every two elements of the MIMO array is designed to be less than −20.9 dB. The well-integrated structure of the antenna and coupler realizes a wide range weight function that mitigates the polarization mismatch caused by the variations in the cross-polarization power ratio (XPR) of incoming waves and the antenna’s inclination angle during human arm-swing motion in human-centric IoT use scenarios. The radiation performance concerning polarization control was examined in an anechoic chamber. Furthermore, a 4×4 MIMO channel capacity experiment was conducted using a three-dimensional spatial fading emulator with an arm-swinging human phantom. A reasonable agreement between the measured and simulated results indicates that the proposed antenna system can achieve a high and stable MIMO channel capacity of over 20 bits/s/Hz irrespective of the XPR and inclination angles.