27 February 2022 in Eastern-European Journal of Enterprise Technologies
This paper considers the influence of the technology to finish and strengthen compressor blade tips made of EP718-ID alloy on the characteristics of the surface quality, surface layer, and bearing capacity. Taking into consideration the special role of the finishing-strengthening treatment in the formation of the quality of the surface layer, various options for blade tip processing were investigated. The blade tips were shaped by high-speed line milling. The finishing-strengthening stage of tip machining included manual polishing and ultrasonic hardening operations with steel balls in various combinations. The basic regularities have been established in the formation of the roughness of tip surfaces, the maximum height of micro-irregularities, the surface microhardness, and the propagation depth of the hardened layer, depending on the combination of finishing-strengthening machining techniques. The results of tests are given for multi-cycle fatigue of blade batches treated according to various variants of the technological process. The efficiency of polishing the surface of the tip after strengthening treatment has been established. To restore the quality characteristics of the surface layer after polishing, it is proposed to perform repeated strengthening treatment. It is shown that the use of double deformation hardening technology with intermediate polishing at the finishing-strengthening stage of blade manufacturing makes it possible to increase the endurance limit from 320 MPa to 400 MPa while increasing durability. Technology for the finishing-strengthening stage of machining blades made from nickel alloys, characterized by significant viscosity, has been devised. It is shown that based on the criteria of minimum labor intensity of machining and maximum endurance of blades, it is effective to use double deformation hardening with steel balls in an ultrasonic field with intermediate polishing.
25 February 2026 in Next Materials
31 October 2024 in New Materials and Technologies in Metallurgy and Mechanical Engineering
Purpose. A comprehensive study of the Fused Deposition Modeling (FDM) process parameters influence on the surface roughness of parts. Research methods. The samples for research were produced by the FDM method on a Profi+midi 3D printer. Slic3rPE software were used for CAD model slicing and G-code preparation. The samples were printed using Nylon filament from the Plexiwire company. Drying of the material before printing was carried out in the ELEKTROTERM electric furnace. The 171621 profilometer was used to determine the roughness of the samples. The STATISTICA software package was used for statistical processing of the results. Results. The influence of different combinations of FDM process parameters on the surface roughness of parts was examined. Surface roughness was found to be most influenced by the following interactions: printing speed and bed temperature, layer height and infill density, layer height and printing speed, layer height and extrusion multiplier, extrusion multiplier and number of shells and layer height and number of solid top and bottom layers . In addition, the following factors separately affect the roughness: infill density, infill pattern, extrusion multiplier and extrusion temperature. Scientific novelty. A rational combination of FDM process parameters has been determined at which the minimum surface roughness is achieved. Thus, it was determined that the roughness has a lower value at a rectilinear infill pattern, and at a infill density of 25 %, an extrusion multiplier of 0.9, an extruder temperature of 265 °C, a printing speed of 40 mm/s, a layer height of 0.15 mm, a number of solid layers of 2 and a platform temperature of 100 °C, the roughness value decreases. If the bed temperature and printing speed are increased, the roughness value will increase, as will the layer height and infill density. Increasing the extrusion multiplier or decreasing the extruder temperature have a negative impact on the surface roughness. All other parameters had almost no effect on surface roughness. Practical value. The results of the study make it possible to predict and improve the quality of nylon parts produced by FDM due to establishing optimal process conditions.
30 April 2025 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Purpose. To investigate the effect of heat treatment on the mechanical properties of polyamide 6 (nylon) parts manufactured by means of Fused Deposition Modelling (FDM) method. Methodology. A 3D printer (Profi+ model) was used for samples printing. The G-code was generated using Slic3rPE software. Heat treatment was performed in a laboratory electric furnace STM-1-10. The effect of factors such as heat treatment temperature, duration of exposure and type of cooling was investigated. The mechanical properties were evaluated by measuring tensile strength and elongation at break using a UIT STM 100S testing machine. The results were statistically analysed using the STATISTICA software package, enabling the identification of the most significant factors and their interactions. Findings. The influence of heat treatment parameters on the tensile strength and elongation at break of nylon parts was investigated. The most significant factor affecting tensile strength was the temperature of heat treatment, followed by the duration of exposure and the interaction between mentioned factors. Elongation at break was most influenced by the duration of exposure, as well as combination of heat treatment temperature and cooling type. The interaction of duration of exposure and cooling type also contributed to the response function (elongation at break). The maximum improvement in tensile strength (+61.74 %) was achieved at a temperature of 130 °C, duration of exposure of 90 minutes. To enhance the elongation at break, heat treatment is recommended under the following parameters: temperature -110 °C, duration ‒ 60 min, cooling ‒ in the furnace down to 20 °C. Originality. It was established that the combination of heat treatment parameters significantly improved the strength and ductility of nylon parts produced by FDM. It was determined that the most effective parameters were the following: temperature ‒ 110‒130 °C, duration of exposure – 60‒90 min and gradual cooling in the furnace. Practical value. The developed recommendations for heat treatment make it possible to improve the mechanical properties of nylon products manufactured by FDM technology. The results of the study open up new opportunities for the use of such parts in the military and dual-purpose products due to their improved strength and durability.
14 April 2026 in Materials & Design
30 September 2024 in Mechanics and Advanced Technologies
Fused Deposition Modelling (FDM) is an additive manufacturing technology that is rapidly gaining popularity due to its ability to produce complex shaped parts in a short time. However, parts produced by means of FDM have porosity that results from the printing process. The mechanical properties of printed parts depend on the FDM process parameters and porosity. This study investigates the effect of FDM process parameters on the porosity of FDM parts. The results of the study show that properly selected FDM process parameters can significantly minimize the percentage of part porosity. The effect of FDM process parameters on porosity was determined by analyzing nine process variables: layer height, extrusion temperature, printing speed, extrusion multiplier, bed temperature, infill pattern, deposited strand width, number of shells, number of solid top and bottom layers. The percentage of samples porosity was measured by means of the hydrostatic weighing method. Using the analysis of variance, statistically significant factors and their combinations affecting the percentage of parts porosity were determined. It was shown that the extrusion multiplier had the greatest influence on the percentage of parts porosity. A significant contribution to the formation of porosity was made by the infill pattern, layer heights, printing speed, number of shells, number of solid top and bottom layers and their interaction. A regression model has been developed that allows predicting the porosity of parts achieved by different combinations of FDM process parameters.