7 January 2020 in IEEE Transactions on Antennas and Propagation
A novel miniaturized printed folded dipole antenna has been designed for narrowband sensing applications. It is shown that the antenna may be systematically engineered to achieve matching to a practical source impedance at frequencies well below its half-wavelength resonance using series-LC loading and asymmetrical arm widths. This approach is used to design an inherently well-matched antenna that does not require an external matching network and demonstrates approximately 75% miniaturization, excellent co- to cross-polarization separation, over 24 dB higher realized gain, and strongly improved radiation efficiency relative to an unloaded folded dipole of the same electrically small size. Experimental validation of a fabricated prototype demonstrates excellent agreement with simulations.
8 October 2018 in IEEE Transactions on Antennas and Propagation
This work establishes that a choke ring—a common patternshaping structure in GPS antennas—can also be effective when employed in ground-penetrating radar (GPR) as a shielding device to isolate GPR antennas from the above-ground environment. A choke-ring shield is compared to similar cavity structures in response to a wideband pulse excitation, and it is shown that, in addition to its pattern-shaping ability, good time-domain performance can be achieved through the inclusion of an absorber within the choke ring’s central cavity. Wideband performance measures are developed, and measured data are in generally very good agreement with simulations. The choke ring is shown to provide a 3–5-dB redirection of radiated power from the back to the front of the shield, while the inclusion of the absorber ensures less than —40dB of late-time clutter.