24 January 2022 in Nuclear Fusion
The Monte-Carlo code ERO2.0 was used to simulate steady-state erosion and transport of beryllium (Be) in the ITER main chamber. Various plasma scenarios were tested, including a variation of the main species (hydrogen, deuterium, helium), plasma conditions (density, temperature, flow velocity) and magnetic configurations. The study provides valuable predictions for the Be transport to the divertor, where it is expected to be an important contributor to dust formation and fuel retention due to build-up of co-deposited layers. The Be gross and net erosion rates provided by this study can help identifying first wall regions with potentially critical armour lifetime.
11 February 2019 in Nuclear Fusion
17 November 2016 in Nuclear Fusion
The theoretical model suggested for ITER main chamber H
α
spectroscopy is applied to the high-resolution spectroscopy (HRS) data of recent JET ITER-like wall (ILW) experiments. The model is aimed at reconstructing the neutral hydrogen isotope density in the SOL, as well as the isotope ratio, by solving a multi-parametric inverse problem with allowance for (i) the strong divertor stray light (DSL) on the main-chamber lines of sight (LoS), (ii) substantial deviation of the neutral atom velocity distribution function (VDF) from a Maxwellian in the SOL, and (iii) data for the direct observation of the divertor. The JET-ILW HRS data on resolving the power at the deuterium and hydrogen spectral lines of the Balmer-alpha series is analysed, with direct observation of the divertor from the top and with observation of the inner wall along the tangential and radial LoS from the equatorial ports. This data allows the spectrum of the DSL and the signal-to-background ratio for the Balmer-alpha light emitted from the far SOL and divertor in the JET-ILW to be evaluated. The results support the expectation of the strong impact of the DSL upon the ITER main chamber H
α
(and visible light) spectroscopy diagnostics.
30 September 2020 in Plasma Physics and Controlled Fusion
A tomographic method for reconstructing the axially symmetric D α emission profile in the ITER scrape-off layer and divertor from D α intensity measurements in the fields of view (FoV) of Vis/IR TV and Divertor Impurity Monitor diagnostics is under development. The method takes into account the strong background signal due to stray light from divertor produced by reflections from the metal wall of the vacuum chamber. The method allows to filter out the reflections in D α signals measured in the main chamber. The accuracy of this method is tested within the framework of a synthetic diagnostic, which uses the Raysect and Cherab numerical codes for ray-tracing simulations. The D α emission profiles, simulated with the SOLPS and OEDGE codes, are used as synthetic experimental data. Uncertainty in light reflection properties of the first wall (FW) is the major factor affecting the accuracy of the D α emission reconstruction. The dependence on the uncertainty in the FW surface roughness and on the ratio of diffusive to specular reflection of the error in recovering useful D α signals (the direct light without reflections) in the FoV of the ITER main chamber H-alpha and Visible Spectroscopy Diagnostic is obtained.
17 February 2015 in Plasma Physics Reports
An algorithm for recovering the effective temperature of atoms of hydrogen (and its isotopes) in the tokamak scrape-off layer from the asymmetry of the Balmer-alpha line shape is proposed. The algorithm is based on the parametrization of the asymmetry of the line shape caused by the nonlocal character of neutral hydrogen flux from the wall into the tokamak plasma. The accuracy of the algorithm is tested against the results of simulations of the velocity distribution function of deuterium neutrals in the scrape-off layer by the EIRENE code with the use of the source data on the main plasma component in the quasi-stationary stage of the inductive mode of ITER operation calculated by the SOLPS4.3 (B2-EIRENE) code.