13 August 2020 in Energy & Environmental Science
The conversion of H2 and CO2 to liquid fuels via Power-to-Liquid (PtL) processes is gaining attention. With their higher energy densities compared to gases, the use of synthetic liquid fuels is particularly interesting in hard-to-abate sectors for which decarbonisation is difficult. However, PtL poses new challenges for the synthesis: away from syngas-based, continuously run, large-scale plants towards more flexible, small-scale concepts with direct CO2-utilisation. This review provides an overview of state of the art synthesis technologies as well as current developments and pilot plants for the most prominent PtL routes for methanol, DME and Fischer–Tropsch-fuels. It should serve as a benchmark for future concepts, guide researchers in their process development and allow a technological evaluation of alternative reactor designs. In the case of power-to-methanol and power-to-FT-fuels, several pilot plants have been realised and the first commercial scale plants are planned or already in operation. In comparison power-to-DME is much less investigated and in an earlier stage of development. For methanol the direct CO2 hydrogenation offers advantages through less by-product formation and lower heat development. However, increased water formation and lower equilibrium conversion necessitate new catalysts and reactor designs. While DME synthesis offers benefits with regards to energy efficiency, operational experience from laboratory tests and pilot plants is still missing. Furthermore, four major process routes for power-to-DME are possible, requiring additional research to determine the optimal concept. In the case of Fischer–Tropsch synthesis, catalysts for direct CO2 utilisation are still in an early stage. Consequently, today's Fischer–Tropsch-based PtL requires a shift to syngas, benefiting from advances in co-electrolysis and reverse water-gas shift reactor design.
1 December 2021 in Renewable and Sustainable Energy Reviews
10 January 2024 in Energy Conversion and Management
12 March 2025 in Renewable and Sustainable Energy Reviews
24 July 2023 in Renewable and Sustainable Energy Reviews
14 June 2022 in Frontiers in Energy Research
Several unforeseen events have affected the energy market in recent years, both on the consumer side and on the primary energy supply side. Once again, the question is being asked, which impact conventional power plants can have on Germany’s energy transition. In this work various energy system studies from the last 4 years are evaluated, covering a time span of 30 years. Summarized, most studies expect an increasing use of natural gas, peaking in the years between 2030 and 2035. While the overall gross electricity generation from conventional power plants decreases, the share of synthetic energy carries will increase from around zero until 2040 to 100% in 2050. Hereby the technologically openness of the used energy system model strongly influences the final installed capacities. While more open simulations lead to a median of about 50 GW in 2050, more restrictive ones expect roughly 30 GW. However, the full load hours will decrease significantly in both cases. Since the synthesis of synthetic energy carriers requires large amounts of renewable electricity, this development is linked to a national electricity demand of over 200 TWh for power-to-x applications and an additional import of 350 TWh of power-to-x products.