4 May 2021 in IEEE Transactions on Network Science and Engineering
The mushroom growth of cellular users requires novel advancements in the existing cellular infrastructure. One way to handle such a tremendous increase is to densely deploy terrestrial small-cell base stations (TSBSs) with careful management of smart backhaul/fronthaul networks. Nevertheless, terrestrial backhaul hubs significantly suffer from the dense fading environment and are difficult to install in a typical urban environment. Therefore, this paper considers the idea of replacing terrestrial backhaul network with an aerial network consisting of unmanned aerial vehicles (UAVs) to provide the fronthaul connectivity between the TSBSs and the ground core-network (GCN). To this end, we focus on the joint positioning of UAVs and the association of TSBSs such that the sum-rate of the overall system is maximized. In particular, the association problem of TSBSs with UAVs is formulated under communication-related constraints, i.e., bandwidth, number of connections to a UAV, power limit, interference threshold, UAV heights, and backhaul data rate. To meet this joint objective, we take advantage of the genetic algorithm (GA) due to the offline nature of our optimization problem. The performance of the proposed approach is evaluated using the unsupervised learning-based k-means clustering algorithm. We observe that the proposed approach is highly effective to satisfy the requirements of smart fronthaul networks.
8 June 2022 in IEEE Transactions on Network and Service Management
With recent advancements in software-defined vehicles, over-the-air (OTA) software updates are crucial to roll out new software and patches for connected vehicles. Traditionally, outdated vehicles are recalled by the manufacturers, however, owners are notoriously difficult to reach with recall notices. Also, organizational and procedural challenges result in many outdated vehicles with insecure and unstable software. In this paper, we propose a dissemination framework for OTA updates using a federated fog environment. Pushing the update to all vehicles via the fog nodes may congest the network, leading up to a single-point failure for update dissemination, as well as, disruption to other installed services at the fog nodes.We propose a software-defined mechanism to select a pivot, which gets the update from the fog node and streams it to other vehicles. Moreover, a timer-barrier mechanism is proposed to identify any malicious vehicles that are barred from participating in pivot selection. The experimental evaluation demonstrates that the proposed scheme improves network convergence time by 40% with 95% node trustworthiness.
10 May 2022 in Cluster Computing
2 March 2022 in IEEE Systems Journal
Fifth generation (5G) cloud-radio access network (C-RAN) aims at providing better performance and support to various applications with stringent data rate and latency requirements. In C-RAN, the processing units, known as the baseband units (BBUs), are segregated from the individual remote radio heads (RRHs) and moved to a convenient location to serve more than one RRH. This migration leads to an efficient resource allocation and cost-effective solution at the expense of a huge fronthaul traffic between the RRH and BBU hotel. The required fronthaul data rate largely depends on the employed functional split options. In this article, we propose a novel optimal BBU placement with a mixed functional split scheme to combat the fronthaul latency challenge while providing the network with greater flexibility and cost reduction. We introduce an integer linear programming (ILP)-based BBU placement problem with a mixed functional split selection approach to simultaneously minimize the number of BBU hotels and fibers, thereby reducing the network cost. Furthermore, a heuristic algorithm is proposed to solve the proposed model for large network scenarios. The obtained results show that an improvement of 25% and 50% is realized with the proposed scheme over the conventional fixed split option scheme for small and large network scenarios, respectively.
22 January 2020 in IEEE Access
11 April 2023 in IEEE Transactions on Vehicular Technology
Network slicing in fifth generation (5G) radio access network (RAN) enables serving massive network traffic with diverse and stringent quality of service (QoS) requirements. Multiple logical networks can be built using RAN slicing over a single RAN infrastructure. This paper considers three different types of slices that are standardized by third generation partner project (3GPP): ultra-reliable low-latency communication (URLLC), enhanced mobile broadband (eMBB), and massive machine type communication (mMTC). Each slice type has unique requirements for data rate, latency, and reliability. Cloud RAN (C-RAN) was proposed to address the requirements of 5G services, which involves physical separation between the remote radio head (RRH) and baseband unit (BBU) in 2-layers. While C-RAN enables more efficient resource utilization and energy consumption, it limits network scalability. Furthermore, C-RAN is unable to meet the stringent latency demands of URLLC services, as well as the massive fronthaul capacity required for eMBB requests. To address this issue, we propose a novel cloud fog RAN (CF-RAN) over wavelength division multiplexing (WDM) architecture. In CF-RAN over WDM the RAN functions are divided into 3 layers, which include the RRH at layer 1, fog nodes at layer 2, and BBU hotels at layer 3. We employ the emerging fog computing paradigm in optical and wireless networks in this suggested architecture. To facilitate low latency URLLC requests, the fog nodes are located closer to the cell site (CS). We propose an integer linear programming (ILP)-based mathematical model. The model's objective is to decrease the number of active BBU hotels and fog nodes while remaining compliant with practical network restrictions. Furthermore, a low complexity greedy heuristic algorithm is proposed to solve the problem and is compared to the branch & bound (B&B) algorithm, which is assumed to provide an optimal solution with exponential complexity. The proposed 3-layer CF-RAN over WDM architecture achieves a 70% improvement in BBU centralization and a 50% reduction in request blocking when compared to the standard 2-layer architecture.