1 March 2025 in Physics of Fluids
The present study explores the aerodynamic performance of serrated raked winglets (SRWs) through detailed computational fluid dynamics analysis, focusing on drag reduction, lift enhancement, and overall efficiency improvements. Utilizing the National Advisory Committee for Aeronautics (NACA) 653218 airfoil, simulations were conducted across a range of angle of attack using a realizable k–ε turbulence model. The study investigates the impact of key parameters, such as serration geometry, count, and spanwise placement on the aerodynamic characteristics. Results reveal that SRWs outperform conventional and raked winglet designs, achieving up to a 14.5% improvement in the lift-to-drag ratio (L/D) at higher angles of attack, with a 15% reduction in drag compared to a conventional wing. The incorporation of serrations was found to effectively minimize wingtip vortex intensity and turbulence, contributing to enhanced flow stability and reduced energy losses. A comparative analysis of triangular and semi-circular serrations highlights the superior vortex suppression capabilities of triangular designs, particularly when positioned near the wingtip, leading to a 6% higher L/D ratio than semi-circular configurations. These findings underscore the potential of SRWs as a transformative wingtip device for optimizing aircraft aerodynamic performance and fuel efficiency, offering valuable insight for future experimental and computational studies in advanced winglet design.
1 March 2025 in Physics of Fluids
The flow entering the combustion chamber of a ramjet engine should be converted from supersonic flow to a subsonic uniform flow where a high total pressure recovery is to be maintained for efficient combustion and optimum operations. The inlet of a ramjet engine is designed to decelerate the incoming supersonic flow to a Mach number less than 0.4 approximately. To ensure this, the design phase of supersonic engines is critical, which leads to an enhanced performance. Analytical Prandtl–Meyer function calculations and computational fluid dynamics (CFD) simulations using MATLAB and ANSYS Fluent were employed to assess ramp performance. The study was performed at a design Mach number of 3, to optimally select the ramp configuration. The work carried out on the optimization of the inlet focuses on improving or maximizing the total pressure recovery and attaining an ideal exit Mach number, by minimizing the cowl lip drag. An off-design Mach number ranging from 1.8 to 3.3 was chosen to perform the CFD simulations, where the pressure recovery and exit Mach numbers are calculated at the convergence of simulations. The optimal configurations for the inlet design obtained through the numerical calculations are a total turning angle of 23° where β1 = 26.48, β2 = 35.24, and β3 = 51.26. The Mach number deviation from the Oswatitsch condition for the first two waves is 0.0075, whereas for the third oblique shock it is 0.99. There was clear concordance between the numerical data and analytical solutions obtained; the pressure recovery showed a 4.37% error between the datasets obtained, which is within the accepted range.